Published date: Jul 03 2024

Journal Title: KnE Social Sciences

Issue title: International Joint Seminar on Education, Social Science and Applied Science (IJESAS)

Pages: 35–48

DOI: 10.18502/kss.v9i19.16475

Alam Tri Yudhayudcha2011@gmail.comDepartment of Mechanical Engineering, Sepuluh Nopember Intitute of Technology (ITS), Keputih Sukolilo Surabaya 60111

Arif WahjudiDepartment of Mechanical Engineering, Sepuluh Nopember Intitute of Technology (ITS), Keputih Sukolilo Surabaya 60111

Tangentially fired boilers have a burner system within a single actuator group and a SOFA system that controls the fuel and air distribution to generate boiler combustion in the furnace. The goal of this study was to determine optimal combustion by statistically examining the effect of changes in the burner and SOFA angles on the response of rear pass boiler temperature and NOx concentration in tangentially burned boilers. (1) Tilting burner angles of +30⁰, +15⁰, 0⁰, –15⁰, and –30⁰, and (2) SOFA tilting and yawing angles of –15⁰, –8⁰, 0⁰, +8⁰, +15⁰ were used in this study. The GA (Genetic Algorithm) approach and CFD software were utilized to optimize the rear pass temperature and NOx content response. The simulation results data were then examined using ANOVA, and it was discovered that tilting burner and tilting SOFA have a substantial effect on response, however, yaw SOFA does not. In this scenario, the resulting angle variations for tilting burner, SOFA-tilt, and SOFA-yaw are +11⁰, –15⁰, and 2⁰, respectively. The optimal angle adjustments result in rear pass temperatures of 821.33 ⁰K and 816.27 ⁰K, with a slight fluctuation of 5.06 ⁰K. This was in contrast to the preceding conditions, when the rear pass temperatures of sides A and B were 781.32 ⁰K and 767.83 ⁰K, respectively, resulting in a 13.49 ⁰K difference.

Keywords: tilting burner, tilting and yawing SOFA, rear pass temperature, NO_x, GA and CFD method

[1] Choi CR, Kim CN. Numerical Investigation On The Flow, Combustion and NOx emission characteristics iin a 500 Mwe Tangentially fired Pulverized-Coal Boiler. Fuel. 2009;88(9):1720–31.

[2] Hidayat R. Numerical Study of Gas-Solid Flow Characteristics and Tangentially Fired Pulverized-Coal Boiler 315 MWe Combustion with Variations in Tilting Angle and Calorific Value of Coal (Case Study of PLTU Pacitan Unit 1). Master’s thesis.Sepuluh November Institute of Technology, Surabaya, 2015.

[3] Ho Young Park. Se Hyun Baek, Hyun Hee Kim, Young Joo Kim, Tae Hyung Kim, Hyun so Lim, Dong so Kang, Reduction of Main Steam Temperature Deviation in A Tangentially Coal -Fired. Two Pass Boiler; 2015. https://doi.org/10.1016/j.fuel.2015.11.005.

[4] Kramer O. Genetic Algorithm Essentials. Oldenburg: University of Oldenburg; 1999.

[5] Ma L, Yu S, Fang Q, Zhang C, Chen G. Effect of Separated Over-Fire Air Angle On Combustion and NOx Emissions in a Down-Fired Utility Boiler With a Novel Combustion System. Process Saf Environ Prot. 2020;138:57–66.

[6] Hutomo NS, Wahjudi A. Numerical Study Effect of Burner Tilt Angle On The Boiler Rear Pass Temperature On PLTU Banten 1 Suralaya Under LRC Coal Conditions. AIP Conf Proc. 2019;2187:020032.

[7] Park HY, Baek SH, Kim YJ, Kim TH, Kang DS, Kim DW. Numerical and Experimental Investigations On The Gas Temperature Deviation In A Large Scale, Advanced Low NOx, Tangentially Fired Pulverized Coal Boiler. Fuel. 2013;2013(104):641–6.

[8] Peng Tan, Dengfeng Tian, Qingyan Fang, Lun Ma, Cheng Zhang, Gang Chen, Lijin Zhong, Honggang Zhang. “Effects of Burner Tilt Angle on the Combustion and NOx Emission Characteristics of a 700 Mwe Deep- Air- Staged Tangentially Pulverized-Coal-Fired Boiler”. Fuel 196 (2017) 314–324, 2017. https://doi.org/10.1016/j.fuel.2017.02.009.

[9] Sankar G, Chandra Sekhar Dhannina, Santhosh, Kumar D, Balasubramanian K R. “Numerical Simulation of the Heat Transfer and NOx Emissions in a 660 MW Tangentially Fired Pulverised Coal Supercritical Boiler”. 2020. https://doi.org/10.1007/s00231- 020-02884-z.

[10] Tharangaraju S, Munisamy K. &; Baskaran, S. Research of Varying Burner Tilt Angle to Reduce Rear Pass Temperature in Coal Fired Boiler. Fifteenth Asian Congress of Fluid Mechanics, p. 1-8, 2017.

[11] The Babcock&Wilcock Company. Steam : Its Generation and Use 42nd Edition. Charlotte, North Carolina, USA, 2015.

[12] Tian D, Zong L, Tan P, Ma L, Fang Q, Zhang C, et al. Influence of Vertical Burner Tilt Angle on The Gas Temperature Deviation in a 700MW Low NOx Tangentially Fired Pulverized-Coal Boiler. Fuel Process Technol. 2015;138:616–28.

[13] Sun W, Zhong W, Yu A, Liu L, Qian Y. Instruction For Product 2129t/h Subcritical Press Control Circle Boiler, Serles No.922-1-8601. Shanghai Boiler Works, LTD; 2009.

[14] Wenjing Sun, Wenqi Zhong, Aibing Yu, Longhai Liu and Yujun Qian. “Numerical investigation on the flow, combustion, and NOx emission characteristics in a 660 MWe tangential firing ultra-supercritical boiler”. Advances in Mechanical Engineering 2016, Vol. 8(2) 1–13, 2016. https://doi.org/10.1177/1687814016630729.

[15] Arkeman Y, Seminar KB, Gunawan H. “Genetic Algorithms: Theory and Application to Business and Industry”. 1st Edition. Bogor, West Java, Indonesia, 2012.

[16] Eka Setiawan Seputro. Bambang Sudarmanta. “Numerical investigation of Over Fire Air (OFA) effect on Flow Characteristics, NOx combustion and emission in a 600 MWe tangential fired pulverized coal boiler”. IPTEK. J Eng. 2019;5(2):1–13.

[17] Nugroho Setyo Hutomo. “Studi Numerik Pengaruh Sudut Tilt Burner terhadap Rear Pass Temperature Boiler PLTU Banten 1 Suralaya pada Kondisi Batubara LRC dan MRC”. Master’s thesis.Sepuluh November Institute of Technology, Surabaya, 2020.

[18] Instruction For Product 2129t/h Subcritical Press Control Circle Boiler, Serles No.922- 1-8601. Shanghai Boiler Works, LTD; 2009.

[19] Luo Lf, Li Fq, Wang Hw. The Influence of Coal Calorific Value On Power Plant Boiler Operation. 2nd International Conference on Environmental Science and Engineering (ESE), 26-30, 2017.

[20] Fang Q, Tian D, Chen G, Zhang C, Tan P, Ma L, et al. Zhang, D. Influence of vertical burner tilt angle on the gas temperature deviation in a 700 MW low NO x tangentially fired pulverised-coal boiler. Fuel Process Technol. 2015;138:616–28.

[21] Chaplin R.A. Fossil Fuel Combustion System. Thermal Power Plants.Vol. II.

[22] Singer JG. Combustion Fossil Power : A Reference Book on Fuel Burning and Steam Generation. 4th ed. Connecticut: Combustion Engineering Inc.; 1993.

[23] Gupta TK, Raza K. Optimization of ANN Architecture : A Review on Nature-Inspired Techniques. In Machine Learning in Bio-Signal Analysis and Diagnostic Imaging. https://doi.org/10.1016/B978-0-12-816086-2.00007-2., 2019.

[24] Wahjudi A, Soepangkat BO, Arriyani YF. Optimization of Cable Ties Injection Molding Process Using Back Propagation Neural Network and Genetic Algorithm (BPNN-GA). Appl Mech Mater. 2016;836:159–64.

[25] Bagci, E., & Isik, B.(2006).Investigation of Surface Roughness in Turning Undirectional GFRP Composites by Using RS Methodology and ANN.International Journal of Advanced Manufacturing Technology, Vol. 31, hal. 10-17, 2006.

[26] Sa’Adiyah D, Bangga G, Widodo W, Ikhwan N. Numerical study of flow, combustion and emissions characteristics in a 625 MWe tangentially fired boiler with composition of coal 70% LRC and 30% MRC. AIP Conference Proceedings, 1867, 2017.

[27] Filkoski, R. V. 3-D MODELLING OF PULVERISED-COAL COMBUSTION IN POWER BOILER 3-D MODELLING OF PULVERISED-COAL COMBUSTION. 2015.

[28] Montgomery DC. Design and Analysis of Experiments. 5th ed. New York: John Wiley & Sons, Inc.; 2001.

[29] Tian ZF, Witt PJ, Schwarz MP, Yang W. Numerical Modelling of Pulverised Coal Combustion. In Handbook of Multiphase Flow Science and Technology, 2017. https://doi.org/10.1007/978-981-4585-86-6_9-2.

[30] Yuan LY, Zhong WQ, Chen X, Li J, Tian WJ. Three-dimensional numerical simulation of variable load combustion of supercritical coal-fired boiler for deep peak load regulation [Natural Sciece Edition]. JSEU. 2019;49:535–41.