Published date: Mar 10 2020

Journal Title: KnE Life Sciences

Issue title: The 2018 International Conference on Logistics and Business Innovation (ICLBI)

Pages: 35–42

DOI: 10.18502/kls.v5i3.6558

Armansyah .Armansyah@binus.eduIndustrial Engineering, Faculty of Engineering, Bina Nusantara University, Jl. K. H. Syahdan No. 9, Jakarta 11480, Indonesia

Hwi-Chie HoIndustrial Engineering, Faculty of Engineering, Bina Nusantara University, Jl. K. H. Syahdan No. 9, Jakarta 11480, Indonesia

Juri SaedonFaculty of Mechanical Engineering, Universiti Teknologi MARA, Jalan Ilmu 1/1, Shah Alam 40450, Malaysia

Hasan HaririMechanical Engineering Departments, Pancasila University, Jl. Raya Lenteng Agung No.56-80, Jakarta 12640, Indonesia

Shahriman AdenanFaculty of Mechanical Engineering, Universiti Teknologi MARA, Jalan Ilmu 1/1, Shah Alam 40450, Malaysia

The parameter of angular speed, depth of tool, and time of dwell of friction welded spot was studied on the alloy of aluminium. To do so, the impact from parameters was investigated through tensile shear test on the welded alloy and using the design of experiment (L8). ANOVA is then used to see important factors and contributions via main effects plots. It was found that angular speed of tool had a big impact on tensile shear load with 45 %, time of dwell 34 %, depth of tool 10 %. The angular speed of 1 400 rpm, time of dwell 9 s, and depth of tool 3.5 mm were the optimal parameters in this study.

Keywords: light material welding, optimize weld process, weld softened material

[1] Çapar N, Kumru U, Baser TA, Tekin G, Saray O. (2017), Friction stir spot welding for automotive application. Int. J. Adv. Auto. and Tech. Promech 2017; 1(3):114–118. http: //www.makalesistemi.com/panel/files/manuscript_files_publish/aa0cfcd5888ff2211e8791d25e8cffef/34ebd727b6d28a7987bc1007e1e63b3c/4356263a3af71ca.pdf

[2] Kwon JK, Kang MS, Yoon SO, Kwon YJ, Hong ST, Kim DI, et al. Influence of tool plunge depth and welding distance on friction stir lap welding of AA5454-O aluminum alloy plates with different thicknesses. Trans. Nonferrous Met. Soc. China 2012; 22(3):s624–s628. https://www.sciencedirect.com/science/ article/abs/pii/S1003632612617750

[3] Nguyen NT, Kim DY, Kim HY. Assessment of the failure load for an AA6061-T6 friction stir spot welding joint. Proceedings of the Institution of Mechanical Engineers B: Journal of Engineering Manufacture 2011; 225(10):1746–1756. https://journals.sagepub.com/doi/10.1177/0954405411405911

[4] Fu T, Li W, Yang X, Li JF, Gao DL. State-of-the-art of friction stir spot welding. J. Mat. Eng. 2015; 43(4):102–114. http://jme.biam.ac.cn/EN/abstract/abstract8288.shtml

[5] Hirasawa S, Badarinarayan H, Okamoto K, Tomimura T, Kawanami T. Analysis of effect of tool geometry on plastic flow during friction stir spot welding using particle method. J. Mat. Proc. Tech. 2010; 210(11):1455–1463. https://www.sciencedirect.com/science/article/pii/S0924013610001135

[6] Mishra RS, Ma ZY. Friction stir welding and processing. Materials Science and Engineering R 2005; 50(1–2): 1–78. https://www.sciencedirect.com/science/article/pii/S0927796X05000768.

[7] Muhayat N, Zubaydi A, Sulistijono, Yuliadi MZ. Effect of tool tilt angle and tool plunge depth on mechanical properties of friction stir welded AA 5083 joints. App. Mec. and Mat. 2014; 493:709–714. https://www.scientific.net/AMM.493.709

[8] Padmanaban R, Kishore VR, Balusamy V. Numerical simulation of temperature distribution and material flow during friction stir welding of dissimilar aluminum alloys. Proc. Eng. 2014; 97:854–863 (2014). https://www.sciencedirect.com/science/article/pii/S1877705814034286

[9] Piccinia JM, Svoboda HG. Effect of the tool penetration depth in friction stir spot welding (FSSW) of dissimilar aluminum alloys. Procedia Materials Science 2015; 8:868–877. https://www.sciencedirect. com/science/article/pii/S2211812815001480

[10] Venukumar S, Baby B, Muthukumaran S, Kailas SV. Microstructural and mechanical properties of walking friction stir spot welded AA 6061-T6 sheets. Proc. Mat. Sc. 2014; 6:656–665. https://www.sciencedirect.com/science/article/pii/S2211812814004465

[11] Montgomery DC. Design and analysis of experiments. 7th edition. John Wiley & Sons, Inc, New York; 2009. pp. 417–480. https://books.google.co.id/books?id= kMMJAm5bD34C&printsec=frontcover&dq=Design+and+Analysis+of+Experiments&hl=en&sa=X&ved=0ahUKEwjnhKqJkc3iAhUKk3AKHcskAWsQ6AEIKjAA#v=onepage&q= Design{%}20and{%}20Analysis{%}20of{%}20Experiments&f=false

[12] Creswell JW. Research design: qualitative, quantitative, and mixed methods approaches. SAGE Publication Inc., USA; 155 2014. P: 155-175 https://books.google.co.id/books?id=4uB76IC_pOQC&printsec=frontcover&dq=Research+design:+qualitative,+quantitative,+and+mixed+methods+approaches&hl=en&sa=X&ved=0ahUKEwjpjr22kc3iAhWq7HMBHZ1LB2gQ6AEIKjAA#v=onepage&q=Research%20design%3A%20qualitative2C%20quantitative%2C%20and%20mixed% 20methods%20approaches&f=false

[13] Ross PJ. Taguchi techniques for quality engineering. 2nd edition. McGraw-Hill, New York; 1996. Pp. 23-146 https://books.google.co.id/booksid=CiunygZ90TsC&q=taguchi+techniques+for+quality+engineering&dq=taguchi+techniques+for+quality+engineering&hl=en&sa=X&ved= 0ahUKEwj08Keqk83iAhUVmuYKHSJqDEkQ6AEIKjAA

[14] Sekhar SR, Chittaranjandas V, Govardhan D, Karthikeyan R. Effect of tool rotational speed on friction stir spot welded AA5052-H38 aluminum alloy. Materials Today: Proceedings 2018; 5(2):5536–5543. https://www.sciencedirect.com/science/article/pii/S2214785317331231

[15] Bozkurt Y, Bilici MK. Application of Taguchi approach to optimize of FSSW parameters on joint properties of dissimilar AA2024-T3 and AA5754-H22 aluminum alloys. Materials & Design 2013; 51:513–521. https://www.sciencedirect.com/science/article/pii/S026130691300397X

[16] Triyono, Sukanto H, Muhayat N, Sutiyono. Effect of stretching during welding process on the weld ability of dissimilar metals resistance spot welded between carbon steel and low nickel stainless steel. Scientific. Net, Adv. Mat. Research. 2014; 894:206–211. https://www.scientific.net/AMR.894.206

[17] Haghshenas M, Gerlich AP. Joining of automotive sheet materials by friction-based welding methods: a review. Engineering Science and Technology, an International Journal 2018; 21(1):130–148. https://www.sciencedirect.com/science/article/pii/S2215098617314921

[18] Zhang Z, Yang Xs, Zhang J, Zhou G, Xu X, Zou B. Effect of welding parameters on microstructure and mechanical properties of friction stir spot welded 5052 aluminum alloy. Materials and Design 2011; 32(8–9):4461–4470. https://www.sciencedirect.com/science/article/pii/S0261306911002330