KnE Materials Science

ISSN: 2519-1438

The latest conference proceedings on physical materials, energy materials, electrical materials.

Features of Waste Chemical Processing Germanium Concentrates

Published date: Dec 31 2020

Journal Title: KnE Materials Science

Issue title: IV Congress “Fundamental Research and Applied Developing of Recycling and Utilization Processes of Technogenic Formations” Volume 2020

Pages: 359–367

DOI: 10.18502/kms.v6i1.8110

Authors:

Igor Nikolaevich Tanutrov - intan38@live.ru

Marina Nikolaevna Sviridova

Abstract:

In order to increase the extraction of germanium in the technology of production of germanium concentrates, as well as finding ways to eliminate the accumulation of toxic waste using modern techniques and equipment, the physical and chemical properties of waste chemical processing of germanium concentrates (OHGC) of two domestic enterprises were experimentally studied. The main components of OHGC are: sulphate hemihydrate CaSO4·0.5H2O and hypochlorite Ca(OCl)2 calcium. The moisture content of the sludge amounted to 30–50 %. The content of germanium in the cakes of both companies is in the range of 0.20 and 0.27 %, respectively, indicating the feasibility of recovery in the Ge. At the same time, the samples of cakes differ significantly in the content of impurities, which depends on the types of raw materials in the preparation of concentrates. Granulometric composition of cakes is characterized by high dispersion. With an average diameter of 12 μm, all particle sizes are in the range of 0.5-15 μm. The distribution of particle sizes is shifted in interval of 0–15 μm, and the area of the particles less than 3 μm is not more than 10 %. The high dispersion of the cake is reflected in the specific surface area, which is 23.7 m2/g. Thermographic study found that the heating of the sample cake is accompanied by two endothermic effects of dehydration at 110 and 145–168 ∘C calcium sulfate and hypochloride semihydrate with corresponding weight loss of 13.1 and 12.9 %. The presence of toxic impurities (arsenic, zinc and lead), as well as chlorine, presents significant challenges for the development of disposal technology with the extraction of germanium. Assuming that the undiscovered part of the germanium in the concentrate is compounds or solid solutions with silicon dioxide, an effective technology should include their reagent high temperature treatment.

Keywords: waste, germanium concentrate, chemical processing, waste, physical and chemical properties

References:

[1] Tanutrov, I. N. and Sviridova, M. N. (2014). Scientific Substantiation, Development and Implementation of Pyro-Metallurgical Technology for Production of Germanium Concentrates. Nonferrous metals, issue 2 (854), pp. 71–75.

[2] Concentrate of Germanium. TU 1774-003-95961127-2008.

[3] Andreev, V. M., et al. (1969). Production Germany. Moscpw: Metallurgy.

[4] Shpirt, M. Y. (2006). Physical, Chemical and Technological Principles of Production of Compounds of Germany. Apatity: Publ. Kolar scientific center, RAS.

[5] Nechvoglod, O. V. and Upolovnikova, A. G. (2019). The Study of Phase Composition of the Products of Electrochemical Oxidation of Sulfide Pellet Systems Cu1.96S–Ni3S2–Cu–Ni. Butlerov Communications, vol. 57, issue 3, pp. 149–154.

[6] Golovin, S. N., et al. (2018). Influence of the Nature of the Precipitating Agent and Chemical-Thermal Treatment on the Phase Composition of Cerium-Containing Layered Double Hydroxides. Butlerov Communications, vol. 56, issue 12, pp. 126–130.

[7] Popova, A. N., Barnakov, C. N. and Khokhlova, G. P. (2018). Investigation of Structural Characteristics of Carbon Materials by Powder X-Ray Diffraction. Butlerov Communications, vol. 56, issue 11, pp. 153–159.

[8] Gabdullin, A. N., et al. (2018). Chemical and Phase Composition of Oxidized Nickel Ores of Kulikov Deposit – Raw Materials for Production of Magnesium Compounds, Fe-Ni containing Concentrates, SiO2. Butlerov Communications, vol. 55, issue 8, pp. 156–161.

[9] Bunting, A. E., Sirotkin, R. O. and Sirotkin, O. S. (2018). The Peculiarities of the Chemical Structure, Properties, and Technology of Inorganic Products on the Basis of Oxides. Butlerov Communications, vol. 53, issue 2, pp. 153–160.

[10] Michael, E. B. (2007). NIOSH Pocket Guide to Chemical hazard. DHHS (NIOSH) Publication No.2005- 149. National Institute for Occupational Safety and Health, p. 454.

[11] Andreeva, N. A. (2011). Chemistry of Cement and Binders. St. Petersburg: SPSUACE.

Download
HTML
Cite
Share
statistics

363 Abstract Views

343 PDF Downloads