KnE Materials Science
ISSN: 2519-1438
The latest conference proceedings on physical materials, energy materials, electrical materials.
Ways for Recycling of Quartz Waste in the Production of Silicate Materials
Published date: Dec 31 2020
Journal Title: KnE Materials Science
Issue title: IV Congress “Fundamental Research and Applied Developing of Recycling and Utilization Processes of Technogenic Formations” Volume 2020
Pages: 177–183
Authors:
Abstract:
The technological properties of quartz waste associated with the clay deposit are investigated by way of emission spectral analysis, petrography and X-ray phase analysis. This study considers the possibility of quartz waste utilization in the production of dry building mixtures as a filler, magnesia-quartz proppants as a raw material component, cement as a siliceous component, fine ceramics as a partially fluxing and exhausting component, silicate brick as the main raw material. In the production of glass and glassware it is possible to make use of the quartz waste as a glass-forming component including silicate blocks after refining for the Al2O3 and Fe2O3 content. Quartz waste can be recommended as molding sand after refining for the contents of Fe2O3, Na2O, K2O, MgO, CaO. Improvement of the properties of the quartz waste can be achieved by ways of elutriation to remove the clay component as well as magnetic separation to remove magnetic compounds of iron.
Keywords: quartz waste, proppants, glass, cement, silicate brick, building mixtures, fine ceramics, molding sand, recycling
References:
[1] Ramdani, S., et al. (2019). Physical and Mechanical Performance of Concrete Made With Waste Rubber Aggregate, Glass Powder and Silica Sand Powder. Journal of Building Engineering, vol. 21, pp. 302-311.
[2] Kazanskaya, L. F. and Smirnova, O. (2018). Supersulphated Cements with Technogenic Raw Materials. International Journal of Civil Engineering and Technology, vol. 9, issue 11, pp. 3006-3012.
[3] Yatsenko, N. D., et al. (1999). An Efficient Technology for Production of Faience Articles using CalciumContaining Waste. Glass and Ceramics, vol. 56, pp. 271–273.
[4] Magenheimer, S. and Mazzullo, J. (1987). The Original Shapes of Quartz Sand Grains. Journal of Sedimentary Petrology, vol. 57, issue 3, pp. 479-487.
[5] Kapustin, F. L. and Shul’meister, T. M. (2017). Keramdor Production Based on Tyumen Clays. Glass and Ceramics. vol. 73, pp. 3-4.
[6] Pavlova, I. A., et al. (2016). Tyumen Clays in the Production of Building Ceramic. Glass and Ceramics. vol. 72, pp. 341-344.
[7] GOST 8735-88. Sand for Construction Work. Testing methods. Moscow: Standartinform.
[8] GOST 8736-2014. Sand for Construction Works. Specifications. Moscow: Standartinform.
[9] GOST R 54571-2011. Magnesial-quarts proppants. Sрeсifiсations. Moscow: Standartinform.
[10] GOST R 51761-2013. Aluminosilicate proppants. Specifications. Moscow: Standartinform.
[11] GOST 2138-91. Moulding sands. General specifications. Moscow: Standartinform.
[12] OST 21-1-80. Sand for the Production of Autoclaved Silicate Products. Moscow: Izdatel’stvo Standartov.
[13] GOST 21216-2014. Clay Raw Materials. Test methods. Moscow: Standartinform.
[14] Gilchrist, J. D. (1977). Silica Bricks. In Fuels, Furnaces and Refractories. Oxford: Pergamon Press, pp. 273-283.
[15] GOST 22551-77. Quartz Sand, Ground Sandstone, Quartzite and Veiny Quartz for Glass Industry. Specifications. Moscow: IPK Izdatel’stvo Standartov.
[16] GOST 7031-75. Quartzy Sand for Fine Ceramics. Moscow: State Committee of Standards of the Council of Ministers of the USSR.