KnE Materials Science
ISSN: 2519-1438
The latest conference proceedings on physical materials, energy materials, electrical materials.
Development Of A Cathode Designing Method To Avoid Electrodes’ Interference During Blisk Electrochemical Machining
Published date: Oct 12 2016
Journal Title: KnE Materials Science
Issue title: IV Sino-Russian ASRTU Symposium on Advanced Materials and Processing Technology (ASRTU)
Pages: 71-77
Authors:
Abstract:
Electrochemical machining plays a prominent role in blisk (bladed integrated disk) construction process. Since blisk channel is narrow and twisted, interference between electrodes may happen during electrochemical machining. Therefore, this paper develops a cathode designing method to avoid interference. Firstly, according to theory of electrochemical machining, machined channel is predicted by calculation. Second, with this channel, interference analysis is carried out and a cathode is designed. Finally, the cathode is employed in experiment and no interference appears.
References:
[1] M. Bußmann and E. Bayer, Market-oriented blisk manufacturing - a challenge for production engineering
[2] A. Mateo, On the feasibility of BLISK produced by linear friction welding, Revista de Metalurgia, 50, no. 3, p. e023, (2014).
[3] F. Klocke, M. Zeis, A. Klink, and D. Veselovac, Technological and economical comparison of roughing strategies via milling, EDM and ECM for titanium-and nickel-based blisks, 98–101
[4] F. Klocke, M. Zeis, A. Klink, and D. Veselovac, Technological and economical comparison of roughing strategies via milling, sinking-EDM, wire-EDM and ECM for titanium- and nickel-based blisks, CIRP Journal of Manufacturing Science and Technology, 6, no. 3, 198–203, (2013).
[5] M. Burger, L. Koll, E. A. Werner, and A. Platz, Electrochemical machining characteristics and resulting surface quality of the nickel-base single-crystalline material LEK94, Journal of Manufacturing Processes, 14, no. 1, 62–70, (2012).
[6] F. Klocke, M. Zeis, S. Harst, A. Klink, D. Veselovac, and M. Baumgärtner, Modeling and simulation of the electrochemical machining (ECM) material removal process for the manufacture of aero engine components, 265–270
[7] D. Zhu, J. Zhang, K. Zhang, J. Liu, Z. Chen, and N. Qu, Electrochemical machining on blisk cascade passage with dynamic additional electrolyte flow, International Journal of Advanced Manufacturing Technology, 80, no. 1-4, 637–645, (2015).
[8] Z. Xu, L. Sun, Y. Hu, and J. Zhang, Flow field design and experimental investigation of electrochemical machining on blisk cascade passage, International Journal of Advanced Manufacturing Technology, 71, no. 1-4, 459–469, (2014).
[9] J. Zhang, D. Zhu, Z. Xu, K. Zhang, J. Liu, N. Qu, and D. Zhu, Improvement of trailing edge accuracy in blisk electrochemical machining by optimizing the electric field with an extended cathode, Journal of Materials Processing Technology, 231, 301–311, (2016).
[10] J. Zhang, Z. Xu, D. Zhu, and W. Su, Study of tool trajectory in blisk channel ECM with spiral feeding, Mater Manufact Proc, Article ID 1151040, (2016)., DOI: 10.1080/10426914.2016. (published online.
[11] D. Zhu, D. Zhu, Z. Xu, and L. Zhou, Trajectory control strategy of cathodes in blisk electrochemical machining, Chinese Journal of Aeronautics, 26, no. 4, 1064–1070, (2013).
[12] D. Zhu, K. Wang, and N. S. Qu, Micro wire electrochemical cutting by using in situ fabricated wire electrode, CIRP Annals - Manufacturing Technology, 56, no. 1, 241–244, (2007).