Published date: Mar 17 2019

Journal Title: KnE Materials Science

Issue title: Theoretical and practical conference with international participation and School for young scientists

Pages: 285–290

DOI: 10.18502/kms.v5i1.3979

A Vladimirovich Sychev

V Ivanovich Zhuchkov

O Vadimovich Zayakinzferro@mail.ru

In this study, the process of stabilization for highly basic self-slaking slags of ferroalloy production by various boron-containing materials were studied: tincalconite, colemanite, and ulexite (produced in Turkey). The viscosities and temperatures of crystallization for the initial boron-containing materials are determined. Under laboratory conditions, high-base slag melts were treated with boron-containing materials to obtain slags containing 0.25 and 0.5% B2О3. It was shown that the addition of boric anhydride to the studied slag melts extends the homogeneous-liquid state interval and reduces their viscosity by 1.2–1.6 times, therefore B2О3can be used as a tool for controlling slag mobility in industrial conditions. The industrial tests were conducted to stabilize the slag of low-carbon ferrochrome using powdered calcined, briquetted, and fused colemanite. After treatment, slags contained 43–47% CaO, 0.18–0.45% B2О3. The results of pilot-industrial experiments show that all applied boron-containing materials ensure slag stabilization and differ only in the degree of boron recovery. Fused colemanite showed the highest results in the recovery of B2О3(up to 98%), a commercial product was obtained which fully complies according to the technical characteristics with the requirements of Specification TU 0798-69-00186499-2014 “Crushed stone and sand from ferroalloy slags. Technical conditions.”

Keywords: ferroalloy, slag, self-slaking slag, stabilization, boron, two-calcium silicate

[1] Grabeliks, A.A., Demin, B.L., Kayrakbaev, S.N. (2010). New technologies of crystallochemical stabilization of slags from refined ferrochrome production. Stal’, no. 5, pp. 78-83.


[2] Sheshukov, O.Yu., Mikheenkov, M.A., Nekrasov, I.V. et al. (2017). Utilization issues of steelmaking refining slags: monography. Nizhniy Tagil: NTI UrFU.


[3] Fadeev, V.I., Ostrovskiy, Ya.I., Bobkova, O.S. et al. Patent Rus no. 2424342 The method for obtaining low carbon ferrochrome; published 20.07.2011, Bulletin. no 20.


[4] Zayakin, O.V., Statnykh R.N., Zhuchkov, V.I. (2018). Studying the characteristics of slag melts in the production of low-carbon ferrochromium. Metallurg, no. 9, pp. 25-29.


[5] Ghose, A., Chopra, S., Young, J.F. (1983). Microstructural characterization of doped dicalcium silicate polymorphs. J. Mater. Sci, vol. 18, pp. 2905-2914.


[6] Beukes, J. P., Dawson, N. F., Van, Zyl P.G. (2010). Theoretical and practical aspects of Cr (VI) in the South African ferrochrome industry, in Proceedings of the Twelfth International Ferroalloys Congress. Sustainable Future. Helsinki, Finland.


[7] Akberdin, A.A., Kim, A.S., Esenjulov, A.B. et al. (2004). Introduction of stabilization technology from silicate decomposition of basic metallurgical slags. In Proceedings of int. Sci-peacticalconf. Theory and practice of pig iron production. Krivoy. rog.. pp. 295–297.


[8] Zhuchkov, V. I., Zayakin O. V., Leont’ev L. I. (2008). Main Trends in the Processing of Poor Chrome Ore Raw Materials. Russian Metallurgy (Metally), no. 8., pp. 709-712.


[9] Kascheev, I.D., Zemlyanoy, K.G., Dosekenov, M.S. et al. (2012). The main characteristics of slags and dust generated during the production of ferrochrome. Proceedings of the congress ”Fundamentals of technologies for processing and recycling of manmade waste. TECHNOGEN - 2012. Ekaterinburg: UIPC.


[10] Zhuchkov, V.I., Zayakin О.V., Zhdanov A.V. (2010). Utilization of substandard and offgrade raw materials for chromium and manganese ferroalloys production. Proceedings of the 12th International Ferroalloys Congress: Sustainable Future. Helsinki, Finland: Outotec Oyj.


[11] Karnouhov, V.N., Voronov, Yu.I., Zayko, V.P. et al. (2001). Low carbon ferrochrome technology. Ekaterinburg: UrO RAN.


[12] Akberdin, A.A. (1989). Calculation of the equilibrium phase composition of oxide systems. Izvestiya AN SSSR. Metally, no. 2, pp. 20–28.


[13] Zhuchkov, V.I., Akberdin, A.A., Vatolin N.A. (2011). Application of Boron-Containing Materials in Metallurgy. Russian Metallurgy, no. 12, pp. 1134-1137.


[14] Gin’e, A., Regur, M. (1973). Minerals structure. In Proceedings of the 5th International Cement Chemistry Congress. Moscow: Stroyizdat.


[15] Gorshkov, V.S., Alexandrov, S.E., Ivaschenko S.I., et al. (1985). Complex processing and use of metallurgical slag in construction. Moscow: stroiizdat.


[16] Akberdin, A.A., Ogurcov, E.A. (1998). Physical properties of boron-containing steel slags. Proceedings of the IX Int. scientific - tech. conf. ”Theory and practice of oxygen-converter processes.». Dnepropetrovsk.


[17] Zayakin, O.V., Akberdin, A.A., Kim, A.S. et al. (2015). Study of the viscosity and crystallization temperature of ferrochrome slags. Proceedings of the XIV Russian Conf. ”The structure and properties of metal and slag melts”. Ekaterinburg: UrO RAN.