Published date: Mar 17 2019

Journal Title: KnE Materials Science

Issue title: Theoretical and practical conference with international participation and School for young scientists

Pages: 118–125

DOI: 10.18502/kms.v5i1.3958

Taranov D Va.v.larionov@ya.ru

Larionov A V

Chumarev V M

Smirnov L A

Trubachev M V

Vohmentsev S A

The article presents the results of studying the phase composition and microstructure of the V-Al-N-C alloy, intended mainly for doping titanium alloys, but also of interest to manufacturers of structural steels. The V-Al-N-C alloy was obtained by the method of out-of-furnace aluminothermic smelting of a mixture containing vanadium pentoxide, aluminum powder, nitrided by the SHS method powdered V-Al-(17-20)N (wt.%) alloy and graphite in copper uncooled molds. The phase composition was determined by X-ray phase analysis (diffractometer - DRON-2.0, radiation - Cu-Kα, monochromator - graphite). The microstructure and composition of the phases were investigated by X-ray microanalysis using a JSM-59000LV scanning electron microscope ( Japan) and an Oxford INCA Energy 200 energy-dispersive X-ray spectrometer (United Kingdom). It is revealed that the matrix of the V-Al-N-C alloy, containing (wt. %): 73.9 V; 23.7 Al, 1.2 N, 0.69 C, and 0.08 O2, are represented by the solid solution of aluminum in vanadium. The main nitrogen-containing phase is aluminum nitride AlN of a cubic structure. The carbide phase can be identified as V2Al0.9C1.1. Nitride and carbide phases are distributed quite uniformly in the alloy matrix. The carbide phase in the structure of the V-Al-N-C alloy is predominantly in the form of threadlike crystals up to 100 μm in length. The nitride phase is represented by small (up to 10 μm) and large (30 ÷ 100

[1] Gorynin, I.V., Chechulin, B.B. (1990). Titanium in mechanical engineering. Moscow.: Mashinostroenie.


[2] Ed. by Boyer, R., Welsch, G. Colling, E.W. (1994). Materials Properties Handbook. Titanium Alloys. ASM International. The Material Information Society.


[3] Ed. by Leyens, C., Peters M. (2003). Titanium and Titanium Alloys. Fundamentals and Application. Weinkeim: WILEY–VCH Verlag GmbH & Co. KGaA.


[4] Pavlova, T.V., Kashapov, A.S., Nochovnaya, N.A. (2012). Titanium alloys for gas turbine engines. All materials. Encyclopedic reference, no. 5, pp. 8-14.


[5] Horev, M.A., Horev, A.I. (2005). Titanium alloys, their application and development prospects. Materialovedenie, no. 7, pp. 25-34.


[6] Oryschenko, O.S., Kudryavcev, A.S., Mikhaylov, V.I. et.al. (2011). Titanium alloys for marine technology and nuclear energy. Voprosy Materialovedeniya, no. 1, pp. 60-74.


[7] Gorynin, I.V., Ushkov, S.S., Baranov, A.V. et.al. (2009). Titanium alloys for marine applications. Mordkie intellectual’nye technologii, no. 4, pp. 61-66.


[8] Moiseev, V.N. (2006). Titanium alloys in the Russian aircraft and space technology. Metallovedenie I termicheskaya obrabotkametallov, no.8, pp. 48


[9] Fokin, M.N., Ruskol, Yu.S., Mosolov, A.V. (1978). Titanium and its alloys in the chemical industry. Reference Guide. Leningrad: Himiya.


[10] Meerson, G.A., Zelikman, A.N. (1955). Metallurgy of rare metals. Moscow: Metallurgizdat.


[11] Gempel, K.A. Translated by Plyushev, V.E. (1965). Handbook of rare metals. Moscow.: Mir.


[12] Andreev, A.L., Anoshkin, N.F., Borzecovskaya, K.M. et.al. (1978). Titanium alloys. Melting and casting of titanium alloys. Moscow.: Metallurgiya.


[13] Borisova, E.A., Bochvar, G.A., Brun, M.Ya. (1980). Titanium alloys. Metallography of titanium alloys. Moscow.: Metallurgiya.


[14] Fromm, E., Gebhart, E. (1980). Gases and carbon in metals. Moscow.: Metallurgiya.


[15] Bobylev, A.V. (1987). Mechanical and technological properties of metals. 2nd ed. Moscow.: Metallurgiya.


[16] Kornilov, I.I. (1975). Titan. Moscow.: Nauka.


[17] Specifications for a vanadium-based master alloy containing aluminum, nitrogen, and carbon OJSC Uralredmet, Russia. http://www.uralredmet.ru/sites/default/files/ Master%20alloys%20for%20titanium%20alloys%20based%20on%20Vanadiumru. pdf.


[18] Specifications for a vanadium-based master alloy containing aluminum, nitrogen and carbon Reading Alloys, USA. https://www.readingalloys.com/-/media/ ametekreadingalloys/techdocscerts/reading%20alloys/spec%20sheets/25% 20aluminum75%20vanadium%20high%20nitrogen.pdf


[19] Specifications for a vanadium-based master alloy containing aluminum, nitrogen and carbon EVRAZ Stratcor, Inc., USA. http://vanadium.evraz.com/upload/Van-Al%204. pdf


[20] Chumarev, V.M., Larionov, A.V., Sel’menskih, N.I. et.al. (2012). Structure and Phase Composition of a V–Al–N Master Alloy. Russian Metallurgy (Metally), no. 11, pp. 924- 928.


[21] Rylov, A.N., Raykov, A.Yu, Martynov, A.V. (2013). Use of Aluminum Nitride in Melting a V–Al–N Master Alloy. Russian Metallurgy (Metally), no. 7, pp. 477-481.


[22] Larionov, A.V., Chumarev, V.M. (2015). Phase composition of V-Al-Ti-N alloys smelted by using of aluminum nitride. Butlerov communications, vol. 44, no. 12, pp. 137-141.


[23] Larionov, A.V., Chumarev, V.M., Rylov, A.N. et.al. (2015). Smelting of the nitrogenbearing V-Al-Ti alloys in the crystallizer of the electroslag furnace. Titan, no. 4, pp. 29-36.


[24] Vokhmencev, S.A., Chumarev, V.M., Larionov, A.V. (2017). Phase composition of products aluminothermic smelting Al-V-Ti-C master alloy. Titan, no.3, pp. 20-24.


[25] Urtyev, V.P., Maximov, V.M. (1959). Methods of master alloys smelting for titanium alloys. Digest of articles. Sudpromgis, no.2.


[26] Pliner, Yu.L., Suchil’nikov, S.I., Rubinstein, E.A. (1963). Aluminothermic production of ferroalloys and master alloys. Moscow: Metallurgiya.


[27] Zelyanskiy, A.V., Mel’nikov, N.K., Prazdnikov, N.P. (2011). Creation of technology and organization of modern industrial production of complex master alloys of rare refractory metals for the manufacture of titanium alloys. In Proceedings of the scientific and technical conference ”Problems and prospects of metallurgy development and mechanical engineering using completed basic research and R & D”. Ekaterinburg: Ural Branch of RAS.


[28] Zakorzhevskiy, V.V., Borovinskaya, I.P., Dubrovskiy, A.Ya. et. al., (2011). Patent 2422246 Rus. The method of obtaining a nitrogen-containing material based on metal nitrides for master alloys of titanium alloys and nitrogen-containing material for master alloys of titanium alloys. Published 27.06.2011, Bull. № 18.