Published date: Mar 17 2019

Journal Title: KnE Materials Science

Issue title: Theoretical and practical conference with international participation and School for young scientists

Pages: 54–69

DOI: 10.18502/kms.v5i1.3952

V Yakovlevich Dashevskyvdashev@imet.ac.ru

V Ivanovich Zhuchkov

L Igorevich Leontiev

Manganese is an important strategic metal. The main consumer of manganese is iron and steel industry. Due to its importance in steel manufacturing, manganese has the first position among ferroalloys. The world output of manganese ferroalloys is around 1% of the total steel output. After the USSR collapsed, Russia has been left without manganese ore reserves. At present, Russia uses an imported ore to smelt only high-carbon ferromanganese and iron-silicon-manganese alloy in limited quantity. Mineral reserves of manganese ores in Russia is quite large: manganese ore reserves averages 230,000 metric tons (around 2% of the world reserves) and estimated resources – more than one billion tons. The quality of the Russian ores is lower than the one from the other main producing countries. The average content of manganese in the Russian ores fluctuates from 9 to 23%. Domestic ores contain high quantity of harmful impurities, first of all phosphorus (0.2–0.8%). The mineral reserves of manganese ores in Russia is based on carbonate ores with a share of over 77%. A problem to advance the establishment of domestic manganese mining base is an extremely important issue from the perspective of economic security. A string of questions ought to be addressed concerning the concentration of lean manganese ores, development of effective technologies to smelt manganese ferroalloys from the concentrates obtained after the concentration and creation of improved techniques to dephosphorize manganese concentrates. While producing manganese ferroalloys from ore to finished alloy, about 50% of the manganese extracted from strata is wasted in the form of by-products such as concentration sludges, slags, residue of small fractions of raw materials and finished products, sludges of smelting processes and dusts. In case of the by-products processing and following usage, it would be possible not only to reduce consumption of raw materials but also to increase manufacturing effectiveness and to minimize environmental impact.

Keywords: ferromanganese, dephosphorization, ore, reserves

[1] Zhuchkov, V.I., et al. (2007). The technology of manganese ferroalloys. High-carbon manganese ferroalloys. Yekaterinburg: UB RAS.


[2] A capsule history of steel alloying and ferroalloy production. http://www.urmcompany. ru/images/docs/steel-alloying-history.pdf.


[3] Zhdanov, A.V., et al. (2014). Waste generation at ferroalloy production. Metallurgist, no. 12, pp. 36-41.


[4] Boyarko, G.Yu. and Khat’kov V.Yu. (2018). Flows of ferroalloys in Russia. Non-ferrous metals, no. 3, pp. 60-69.


[5] Governmental report. (2014). On the situation and utilization of mineral resources of the Russian Federation in 2013.Manganese ores. Moscow: LLC “Mineral-Info


[6] Import to Russia: Manganese ores. ru-stat.com>date-Y2013/RU/import/AU/052602


[7] Seregin, A.N. (2015). The development of technological solutions providing the substitution of manganese ore import. Chapter1. Analysis of manganese market and problems of supplying Russia with manganese products. Problems of Ferrous Metallurgy and Material Science, no.3 pp.15-28.


[8] Technological procedure for the project “Construction of Usinski ore mining and processing enterprise. Crushing and concentration factory.” (2008). Yekaterinburg: OJSC “Uralmekanobr”.


[9] Dashevsky, V.Ya., et al. (2013). Production of manganese ferroalloys with use of manganese ores of the Usinskoe field. Izvestiya. Ferrous Metallurgy, no 9, pp. 9-16.


[10] Leontiev, L.I., et al. (2017). Opportunities of import substitution in mining and smelting complex. Heavy Engineering, no. 1, pp. 19-24.


[11] Chernobrovin, V.P., et al. (2009). Complex processing of carbonate manganese materials. Chelyabinsk: SUFU.


[12] Khitrik, S.I., et al. (1969). Production of low-phosphorus manganese concentrates. Kiev: Tekhnika.


[13] Osokina, G.N., et al. (1977). The hausmannite method to concentrate and dephosphorize manganese concentrates, in Physical-Chemical Principles of Manganese Metallurgy. Moscow: Nauka.


[14] Bezjazykov, B.N. (1971). Investigation and development of the dithionate method for processing lean manganese products. Ph.D. dissertation, Mekhanobrchermet.


[15] Dashevsky, V.Ya., et al. (1990). Solubility of sulfur in melts based on manganese, in Theory and Practice of Manganese Metallurgy. Moscow: Nauka.


[16] Dashevsky, V.Ya., et al. (1987). Smelting of low-phosphorus carbon ferromanganese using a chemical method of concentration. Steel, no. 4, pp. 50–59.


[17] Khasik, M.I. (1992). Manganese. Moscow: Metallurgy.


[18] Dashevsky, V.Ya., et al. (2016). Patent Ru no. 2594997. A method to dephosphorize manganese ores and concentrates.


[19] Dashevsky, V.Ya., et al. (2017). Dephosphorization of oxide manganese-containing melts. Proceedings of the Academy of Sciences, vol. 473, no. 4, pp. 446-448.


[20] Zhdanov A.V., et al. (2014). Utilization of ferroalloy production wastes. Steel, no. 13, pp. 92–98.


[21] Zhuchkov V.I., et al. (2010). Utilization of substandard and offgrade raw material for chromium and manganese ferroalloys production, in Proceeding of the 12h International Ferroalloys Congress: Sustainable Future. Helsinki, Finland.


[22] Dashevsky, V.Ya., et al. (2017). Increase of manganese extraction at production of manganese ferroalloys. Steel, no. 8, pp. 20–23.


[23] Dashevsky, V.Ya., et al. (2012). Patent Ru no. 2458994. A method of alloying cast iron by manganese.


[24] Dashevsky, V.Ya., et al. (2013). Additional extraction of manganese from slags of smelting process of refined manganese ferroalloys. Steel, no. 10, pp. 60–67.


[25] Dashevsky, V.Ya. (2004). Iron-manganese concretions of the Gulf of Finland – perspective raw materials for ferroalloy production. Resources, Technologies, Economics, no. 5, pp. 15–19.


[26] Zhuchkov, V.I., et al. (2008). The technology of manganese ferroalloys. Low-carbon alloys. Yekaterinburg: IMET UB RAS.