Published date: May 06 2018

Journal Title: KnE Materials Science

Issue title: 15th International School-Conference "New Materials – Materials of Innovative Energy" (MIE)

Pages: 558–565

DOI: 10.18502/kms.v4i1.2210

S A Ogleznevaosa@pm.pstu.ru

K L Saenkov

The diffusion processes and sintering kinetics in micro- and nanodispersed ”Fe-Ni” powder systems during sintering in α- and γ-regions with free and spark plasma sintering (SPS), as well as the structure and properties of metastable powder steels on the basis of these systems are studied. The diffusion coefficient (D) in iron-nickel systems was 2-3 times higher in systems with nanodispersed nickel powder than in the system with microdispersed powder. The SPS provides, at lower temperatures and a time, an increase of D by an order of magnitude or more, compared to free sintering. The coefficients of the equation of the Ivensen sintering kinetics are calculated. The use of SPS for the iron-nickel powder system significantly reduced the activation
energy of sintering. In the SPS process, as in free sintering, in the carbide steels of the ”iron-nickel-titanium carbide” system, a ferrite-austenite structure is formed in which, after abrasion friction, a metastable austenite is transformed into a martensite of deformation, while the volume of conversion is larger, the higher were the hardness, microhardness and wear resistance. The use of nanodispersed powders of nickel
and titanium carbide for the manufacture of diamond tools have improved its cutting ability.

[1] Vereshchagin V A, Zhuravlev V V 1991 Composite diamond-containing materials and coatings. Minsk: Science and Technology 208.


[2] Zaitsev A A, Kurbatkina V V, Levashev E A 2008 Izv. High schools. Nonferrous metallurgy Peculiarities of the influence of nanodispersed additives on the sintering process and properties of powdered cobalt alloys 2 57-59.


[3] Alymov M I 2007 Powder metallurgy of nanocrystalline materials 169.


[4] Anisimov A G, Mali V I 2010 FGV Investigation of the possibility of SPS of powder nanostructured materials 46(2) 135-138.


[5] Bugrov Yu V, Protsiv Yu V 2011 Metallurgy and thermodeformation processing of special steels and alloys: a set of teaching 130.


[6] Shatsov A A, Ryaposov I V 2010 Metallurgy and heat treatment of metals Concentration-inhomogeneous nickel-molybdenum trip-steel 11 47-50.


[7] Oglezneva S A 2011 Friction and wear Diamond tool on a steel metastable binder for cutting natural stone 32(4) 409 - 414.