Published date: May 06 2018

Journal Title: KnE Materials Science

Issue title: 15th International School-Conference "New Materials – Materials of Innovative Energy" (MIE)

Pages: 287–295

DOI: 10.18502/kms.v4i1.2153

M Isaenkovaisamarg@mail.ru

Y Perlovich

V Fesenko

Y Babich

M Zaripova

N Krapivka

The paper presents the results of studying the regularities of formation of the rolling texture in single crystals of Zr-25%Nb alloy, with different initial orientation relative to the external principal directions in the sheet: normal (ND) and rolling direction (RD). Varying the initial orientation of the single crystal made it possible to reveal stable orientations, among which are textural components {001} <100>, {001} <110>, {111} <110> and {111} <112>. For orientation <111> of single crystal, in the matrix of a quasi-single crystal it was possible to detect a finely dispersed ω-phase, which causes the appearance of an extended halo in the diffraction spectrum. The presence of

[1] Yuhimchuk A, Kalashnikov A. Computer modeling of stress and deformation of the femur using intramedullary metal retainers of various elasticity. - Bulletin of orthopedics, traumatology and prosthetics, 2015, 3, p. 56-62.


[2] Gotman I. Characteristics of Metals Used in Implants 11 Journal of endourology. 1997. V. 11, № 6. P. 383-388.


[3] Miyazaki S, Kim HY, Hosoda H (2006) Development and characterization of Ni-free Ti-base shape memory and superelastic alloys. Mater Sci Eng A 438–440:18–24


[4] Bertrand E, Gloriant T, Gordin DM, Vasilescu E, Drob P, Vasilescu C, Drob SI (2010) Synthesis and characterization of a new superelastic Ti–25Ta–25Nb biomedical alloy. J Mech Behav Biomed Mater 3:559–564


[5] Brailovski V, Prokoshkin S, Gauthier M, Inaekyan K, Dubinskiy S, Petrzhik M, Filonov M (2011) Bulk and porous metastable beta Ti–Nb–Zr(Ta) alloys for biomedical applications. Mater Sci Eng C 31:643–657


[6] Yu. A. Perlovich, M Isaenkova, S Chekanov, V Fesenko, Krymskaya O. Superelastic alloy Ti-22%Nb-6%Zr: X-ray study of deformation features – IOP Conf. Series: Materials Science and Engineering 130 (2016) 012034 doi:10.1088/1757- 899X/130/1/012034


[7] Zhang JY, Sun F, Hao YL, Gozdecki N, Lebrun E, Vermaut P, Portier R, Gloriant T, Laheurte P, Prima F (2013) Influence of equiatomic Zr/Nb substitution on superelastic behavior of Ti–Nb–Zr alloy. Mater Sci Eng A 563:78–85


[8] Pawlik K. Determination of the orientation distribution function from pole figures in arbitrarily defined cells, phys. stat. sol. (b) 134, 477 (1986)


[9] Jura J., Pospiech J. The Determination of orientation distribution function from incomplete pole figures, J.Textures of Crystalline Solids, 1978, vol.3, pp. 1-25.


[10] Isaenkova, M., Perlovich, Y., Fesenko, V. Modern methods of experimental construction of texture complete direct pole figures by using X-ray data IOP Conf. Series: Materials Science and Engineering 130 (2016) 012055 doi:10.1088/1757- 899X/130/1/012055.


[11] Isaenkova M.G., Perlovich Yu.A., Krymskaya O.A., Fesenko V.A., Babich Y.A. Optimization of the procedure for determining integral texture parameters of products from zirconium-based alloys using the orientation distribution function - IOP Conf. Series: Materials Science and Engineering 130 (2016) 012056 doi:10.1088/1757- 899X/130/1/012056


[12] Dobromyslov A, Taluc N. Structure of zirconium and its alloys. – Ekaterinburg, 1997. - 228 p.


[13] Perlovich Y., Isaenkova, M., Fesenko V., Krymskaya O. Texture Evidences of Interaction between Plastic Deformation and Phase Transformations in Zr-based Alloys. Materials Science Forum Vol. 702-703, 2012, pp.283 286.