KnE Materials Science
ISSN: 2519-1438
The latest conference proceedings on physical materials, energy materials, electrical materials.
Formation of High-quality Aluminum Oxide under Ion Beam Irradiation
Published date: May 06 2018
Journal Title: KnE Materials Science
Issue title: 15th International School-Conference "New Materials – Materials of Innovative Energy" (MIE)
Pages: 1–8
Authors:
Abstract:
In this work we used the radiation–induced technique of selective association of atoms (SAA) to create the aluminum oxide layer on the surface of metallic Al under oxygen ion beam irradiation. Optimal conditions for carrying out the radiation-induced aluminum oxidation process were established to minimize the target sputtering. An aluminum oxide layer of 20 nm thickness was obtained after irradiation of aluminum target with oxygen ions with 0.2 keV energy up to a dose of ∼2.6 ⋅ 1018 ions/cm2 at room temperature. HRTEM and EELS techniques were used to characterize the chemical compositional changes after irradiation. It was found that aluminum oxide layer after irradiation contained an excessive amount (∼10 at.%) of implanted oxygen.
Keywords: ion beam irradiation, aluminum thin films, EELS, HRTEM
References:
[1] B.A. Gurovich, K.E. Prikhodko, E.A. Kuleshova et al., «Use of radiation effects for a controlled change in the chemical composition and properties of materials by intentional addition or substitution of atoms of a certain kind», Journal of Experimental and Theoretical Physics v.116(6), pp. 916-927, 2013.
[2] B.A. Gurovich, K.E. Prikhod’ko, A.N. Taldenkov et al., «Fabrication of metal nanowires by ion-beam irradiation of oxides through high aspect ratio resist masks», Journal of Vacuum Science and Technology B; v. 29(2), pp.021013-1 - 021013-5, 2011.
[3] B.A. Gurovich, K.E. Prikhod’ko, D.A. Komarov, A.N. Taldenkov, «Formation of monocrystalline silicon nanowires using low-energy ion irradiation», Nanotechnologies in Russia V. 8, No 3, pp. 199-204, 2013.
[4] B.A. Gurovich, K.E. Prikhodko, D.A. Komarov, M.A. Dement’eva, L.V. Kutuzov, «The use of ion irradiation to control the thickness of thin superconducting films», Nuclear Instruments and Methods B, to be published, 2017.
[5] M.A. Korolev, T.Yu. Krupkina, M.G. Putrya, «Technology, designs and methods for modeling silicon integrated circuits», part 2, 424 p., 2009, Binom.
[6] J.F. Ziegler, J.P. Biersack, M.D. Ziegler, «The Stopping and Range of Ions in Matter», Lulu Press Co., Morrisville, 2008. http://www.srim.org.
[7] JCPDS № 3-1033
