Published date: Jun 19 2018

Journal Title: KnE Life Sciences

Issue title: International Conference of Occupational Health and Safety (ICOHS 2017)

Pages: 30–45

DOI: 10.18502/kls.v4i5.2537

K N Wulandari

A R Tualeka

N Widajati

N Fitrinafilatulfitri@gmail.com

The objective of this study was to conduct risk assessment on hull painting process and give the high-risk control recommendation at PT. X Surabaya. Methods of this study was a descriptive research with three steps of analysis. The first step was to identify all the potential hazards on hull painting process through observation and interview. The next step was to specify the likelihood and the consequence from each risk. And, the final step of analysis was to determine the risk value and its ranks. The highest risk got the priority of the recommendation. The results obtained showed that high risk can occur, among others, if hit by forklift, the fall of the machine being transported by a crane, a strung ladder, a fire and explosion, a fall from a height, and
a hearing loss. Recommendations for high-risk hazard control include the formulation of policies or regulations, installation of signs that support policy, socialization of risk control policies, establishment of emergency response teams and first-aid teams, and socialization, monitoring, use and maintenance of personal protective equipment. The conclusion of this study was that the hull painting process had 22 hazard risks that consist of 6 high risks, 12 moderate risks and 4 acceptable risks. The high-risk control recommendation includes engineering control, administrative and the usage of personal protection equipment.

Keywords: risk assessment, hull painting process, high-risk control recommendation

[1] Ariany, Z. (2014). Kajian Reparasi Pengecatan pada Lambung Kapal (Studi Kasus KM. Kirana 3). Teknik, vol. 35, no. 1, pp. 27–32.


[2] The WorkSafe Western Australia Commission. (2009). Code of Practice Spray Painting. Perth: Chamber of Commerce and Industry of Western Australia.


[3] Health and Safety Executive. (2011). Five Steps to Risk Assessment. Retrieved from http://www.hse.gov.uk/risk/fivesteps/htm


[4] Division of Occupational Safety and Health. (2007). Forklift Safety Guard. Washington: Department of Labor and Industry.


[5] Ramli, S. (2010). Petunjuk Praktis Manajemen Kebakaran (Fire Management). Jakarta: Dian Rakyat.


[6] Wiryosumarto, H. (2010). Teknologi Pengelasan Logam. Bandung: Pradyna Paramita.


[7] Sjamsuhidajat, R. de Jong. (2004). Buku Ajar Ilmu Bedah Edisi 2. Jakarta: EGC.


[8] Gempur, S. (2004). Manajemen Keselamatan dan Kesehatan Kerja. Jakarta: Prestasi Pustaka Publisher.


[9] W. M. Barr and Company. (2008). Material Safety Data Sheet Paint Thinner. Memphis: W.M. Barr and Company.


[10] Hempel. (16 June 2016). Safety Data Sheet: Hempalin Enamel 52140. Retrieved from http://www.hempel.com/product-list/SDS-Download?download= 1&quality=52140&market=Europe&lang=en-US&pid=5214011480&fileName= {%}22HEMPALIN{%}20ENAMEL{%}205214011480{%}20en-US.pdf{%}22.


[11] Humantech Inc. (1995). Applied Ergonomics Training Manual (2nd edition). Australia: Barkeley Vale.


[12] Levy, P. E. (2006). Industrial Organizational Psychology. USA: Houghton Miffin Company.


[13] Tualeka, A. R. (2013). Analisis Risiko. Surabaya: Graha Ilmu Mulia.


[14] Tarwaka. (2008). Keselamatan dan Kesehatan Kerja: Manajemen dan Implementasi K3 di Tempat Kerja. Surakarta: Harapan Press.


[15] Tualeka, A. R. (2015). Analisis Risiko: Risk Assessment, Risk Management, & Risk Communication di Lingkungan Kerja. Surabaya: CV. Bumi Lestari.


[16] Ramli, S. (2011). Pedoman Praktis Manajemen Risiko dalam Perspektif K3 OHS Risk Management. Jakarta: Dian Rakyat.