KnE Engineering

ISSN: 2518-6841

The latest conference proceedings on all fields of engineering.

Low Liquid-to-solid Ratio of Mining Waste and Slag Binary Alkali-activated Material

Published date: May 03 2020

Journal Title: KnE Engineering

Issue title: STARTCON19 - International Doctorate Students Conference + Lab Workshop in Civil Engineering

Pages: 202–213

DOI: 10.18502/keg.v5i5.6941

Authors:

Naim Sedira - sedira.naim@ubi.pt

João Castro-Gomes

Abstract:

This study investigates the effect of the increasingly compressing pressures on the properties of the low liquid-to-solid (L/S) ratio binary alkali-activated binder to use as a binder for the manufacturing of engineered stones. The binders were a combination of two types of wastes (aluminosilicate source) as precursors (TMWM 50 Vt.% + EAF-Slag 50 Vt.%), blended with (11.11 wt.%) alkaline activator solution (NaOH/Na2SiO3 with weight ratio 4/1). The mixtures were molded in cube and exposed to five different pressures (20, 40, 60, 80 and 100 MPa) in order to obtain a compressed alkali-activated binder. The main evaluation techniques in this study were compressive strength, and Fourier Transform Infrared Spectroscopy (FTIR). The results showed that the maximum compressive strength (50.57 MPa) was obtained at a pressing pressure 100 MPa at twenty-eight days of testing.

References:

[1] R. M. Andrew, Global CO2 emissions from cement production. Earth System Science Data Discussions, (2017) 1–52.

[2] L. Huang, G. Krigsvoll, F. Johansen, Y. Liu, & X. Zhang, Carbon emission of global construction sector. Renewable and Sustainable Energy Reviews, 81 (2018) 1906–1916.

[3] J.. Provis & J. S. J. Van Deventer, Geopolymers - Structure, processing, properties and industrial applications (Woodhed Publishing Limited and CRC Press LLC, 2009).

[4] D. Panias, I. P. Giannopoulou, & T. Perraki, Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 301 (2007) 246–254.

[5] H. Xu & J. S. Van Deventer, Microstructural characterisation of geopolymers synthesised from kaolinite/stilbite mixtures using XRD, MAS-NMR, SEM/EDX, TEM/EDX, and HREM. 32 (2002) 1705–1716.

[6] N. Sedira, J. Castro-Gomes, G. Kastiukas, X. Zhou, & A. Vargas, A review on mineral waste for chemicalactivated binders: mineralogical and chemical characteristics. Mining Science, 24 (2017).

[7] F. Pacheco-Torgal, J. P. Castro-Gomes, & S. Jalali, Investigations of tungsten mine waste geopolymeric binder: Strength and microstructure. Construction and Building Materials, 22 (2008) 2212–2219.

[8] N. Sedira and J. Castro Gomes, “Strength and microstructure of tungsten mining waste-based hybrid alkaline material : effect of activators,” in Proceedings of the 12th fib International PhD Symposium in Civil Engineering, 2018, pp. 145–152.

[9] G. Kastiukas, D. Ph, X. Zhou, D. Ph, M. Asce, & J. Castro-gomes, Preparation Conditions for the Synthesis of Alkali-Activated Binders Using Tungsten Mining Waste. 29 (2017) 1–9.

[10] N. Sedira, J. Castro-Gomes, & M. Magrinho, Red clay brick and tungsten mining waste-based alkaliactivated binder: Microstructural and mechanical properties. Construction and Building Materials, 190 (2018) 1034–1048.

[11] A. Palomo, M. W. Grutzeck, & M. T. Blanco, Alkali-activated fly ashes: A cement for the future. Cement and Concrete Research, 29 (1999) 1323–1329.

[12] W. Gutt & P. J. Nixon, Use of waste materials in the construction industry. Matériaux et Construction, 12 (1979) 255–306.

[13] N. Sedira & J. Castro-gomes, Effects of EAF-S on alkali-activation of tungsten mining waste: mechanical properties. REMINE - Int. Conf. Brok. Event - UBI, Covilha, Portugal. (2019), pp. 1–6.

[14] P. S. Humbert & J. Castro-Gomes, CO2 activated steel slag-based materials: A review. Journal of Cleaner Production, 208 (2019) 448–457.

[15] H. M. Khater & M. Ezzat, Preparation and characterization of engineered stones based geopolymer composites. Journal of Building Engineering, 20 (2018) 493–500.

[16] N. Sedira & J. Castro-gomes, Study of an alkali-activated binder based on tungsten mining mud and brick powder waste. 8th Scientific-Technical Conference on Material Problems in Civil Engineering, 06002 (2018) 1–8.

[17] P. S. Humbert, J. P. Castro-Gomes, & H. Savastano, Clinker-free CO2 cured steel slag based binder: Optimal conditions and potential applications. Construction and Building Materials, 210 (2019) 413–421.

[18] S. N. Ghosh, Infra-red spectra of some selected minerals, rocks and products. Journal of Materials Science, 13 (1978) 1877–1886.

[19] M. Criado, W. Aperador, & I. Sobrados, Microstructural and mechanical properties of alkali activated Colombian raw materials. Materials, 9 (2016).

[20] F. Puertas & M. Torres-Carrasco, Use of glass waste as an activator in the preparation of alkali-activated slag. Mechanical strength and paste characterisation. Cement and Concrete Research, 57 (2014) 95–104.

[21] P. Yu, R. J. Kirkpatrick, B. Poe, P. F. McMillan, & X. Cong, Structure of Calcium Silicate Hydrate (C-SH): Near-, Mid-, and Far-Infrared Spectroscopy. Journal of the American Ceramic Society, 48 (1999) 742–748.

[22] O. Rudić, V. Ducman, M. Malešev, V. Radonjanin, S. Draganić, S. Šupić, & M. Radeka, Aggregates Obtained by Alkali Activation of Fly Ash: The Effect of Granulation, Pelletization Methods and Curing Regimes. Materials, 12 (2019) 776.

[23] Z. Sun, H. Cui, H. An, D. Tao, Y. Xu, J. Zhai, & Q. Li, Synthesis and thermal behavior of geopolymer-type material from waste ceramic. Construction and Building Materials, 49 (2013) 281–287.

[24] I. García-Lodeiro, A. Fernández-Jiménez, M. T. Blanco, & A. Palomo, FTIR study of the sol – gel synthesis of cementitious gels: C – S – H and N – A – S – H. Journal of Sol-Gel Science and Technology, (2008) 63–72.

[25] I. G. Lodeiro, D. E. Macphee, A. Palomo, & A. Fernández-jiménez, Effect of alkalis on fresh C – S – H gels. FTIR analysis. Cement and Concrete Research, 39 (2009) 147–153.

[26] N. Sedira & J. Castro-gomes, Effect of activators on hybrid alkaline binder based on tungsten mining waste and ground granulated blast furnace slag. Construction and Building Materials, 232 (2020) 117176.

[27] S. Onisei, Y. Pontikes, T. Van Gerven, G. N. Angelopoulos, T. Velea, V. Predica, & P. Moldovan, Synthesis of inorganic polymers using fly ash and primary lead slag. Journal of Hazardous Materials, 205–206 (2012) 101–110.

[28] C. Dupuy, A. Gharzouni, N. Texier-Mandoki, X. Bourbon, & S. Rossignol, Alkali-activated materials based on callovo-oxfordian argillite: Formation, structure and mechanical properties. Journal of Ceramic Science and Technology, 9 (2018) 127–140.

Download
HTML
Cite
Share
statistics

458 Abstract Views

284 PDF Downloads