KnE Engineering

ISSN: 2518-6841

The latest conference proceedings on all fields of engineering.

Evaluation of Metals Leaching in Permeable Asphalt Pavement and Conventional Asphalt Pavement

Published date: May 03 2020

Journal Title: KnE Engineering

Issue title: STARTCON19 - International Doctorate Students Conference + Lab Workshop in Civil Engineering

Pages: 166–176

DOI: 10.18502/keg.v5i5.6935

Authors:

Márcia Lopes Afonsomarcia.afonso@ubi.ptC-MADE – Centre od Materials and Building Technologies, University of Beira Interior, Faculty of Engineering, Calçada Fonte do Lameiro, 6200-358 Covilhã, Portugal

António AlbuquerqueFibEnTech - Fiber Materials and Environmental Technologies, University of Beira Interior, Faculty of Engineering, Calçada Fonte do Lameiro, 6200-358 Covilhã, Portugal

Cristina FaelC-MADE – Centre od Materials and Building Technologies, University of Beira Interior, Faculty of Engineering, Calçada Fonte do Lameiro, 6200-358 Covilhã, Portugal

Marisa Dinis- AlmeidaC-MADE – Centre od Materials and Building Technologies, University of Beira Interior, Faculty of Engineering, Calçada Fonte do Lameiro, 6200-358 Covilhã, Portugal

Abstract:

A permeable asphalt pavement (PP) and a conventional asphalt pavement (PD) have been tested regarding the potential leaching of the metals Cd, Cr, Fe, Pb, Mn, Ni and Zn during 11 rain events immediately after their construction. Water samples were picked up for the rain water and in four sampling points of both pavements during every rain, two located at the surface of the pavements (PPE and PDE), and other two after infiltration in the pavements (PPI and PDI). The results show that there was introduction and transport of Cr, Fe, Pb, Mn, Ni and Zn during surface runoff on pavements. After water infiltration in the pavements, there was significant removal of Cr in the PD pavement, Pb and Zn concentrations did not decrease in depth and concentrations of Fe and Ni increased after infiltration. However, the concentrations of all metals in the leaching water are very low comparing with the minimum standard legal values set up for irrigation and discharge on water courses.

References:

[1] WAPA, Porous Asphalt Pavements, Wisconsin Asphalt Pavement Association, September 2015, 1–12, (2015).

[2] R. Elvik, P. Greibe. Road safety effects of porous asphalt: A systematic review of evaluation studies, Accid. Anal. Prev., 37: 3, 515–522 (2005).

[3] A. Fini, P. Frangi, J. Mori, D. Donzelli, F. Ferrini. Nature based solutions to mitigate soil sealing in urban areas: Results from a 4-year study comparing permeable, porous, and impermeable pavements, Environ. Res., 156: 443–454 (2017).

[4] R. Roseen, T. Ballestero, J. Houle, J. Briggs, K. Houle. Water quality and hydrologic performance of a porous asphalt pavement as a storm-water treatment strategy in a cold climate, J. Environ. Eng., 138: 1, 81–89 (2012).

[5] G. Burton, R. Pitt, Stormwater Effects Handbook - A toolbox for watershed Managers, Scientists and Engineers, Lewis Publishers, CRC Press LLC, USA (2001).

[6] R. Pitt, S. Clark, K. Parmer, Potential groundwater contamination from intentional and nonintentional stormwater infiltration, Risk Reduction Engineering Laboratory, Office of Research and Development, U.S. Environmental Protection Agency, USA (1994).

[7] C. Pagotto, M. Legret, P. Cloirec. Comparison of the hydraulic behaviour and the quality of highway runoff water according to the type of pavement, Water Res., 34: 18, 4446–4454 (2000).

[8] W. Jiang, A. Sha, J. Xiao, Y. Li, Y. Huang. Experimental study on filtration effect and mechanism of pavement runoff in permeable asphalt pavement, Constr. Build. Mater., 100: 102–110 (2015).

[9] Decree Law No. 236/98 de 1 de Agosto, Estabelece normas, critérios e objetivos de qualidade com a finalidade de proteger o meio aquático e melhorar a qualidade das águas em função dos seusprincipais usos, Ministério do Ambiente, Diário da República Portuguesa, No. 176, 3676–3722, Lisboa, Portugal (1998).

[10] Estradas de Portugal S.A., Caderno de Encargos Tipo Obra, Pavimentação, 14.03 Características dos materiais e 15.03 Métodos construtivos, Vol. V. Estradas de Portugal, Lisboa, Portugal (2014).

[11] M. Afonso, M. Dinis-Almeida, and C. S. Fael. Study of the porous asphalt performance with cellulosic fibres, Constr. Build. Mater., 135: 104–111 (2017).

[12] M. Hamzah, N. Abdullah, J. Voskuilen, G. van Bochove. Laboratory simulation of the clogging behaviour of single-layer and two-layer porous asphalt, Road Mater. Pavement Des., 14: 1, 107–125 (2013).

[13] ISO 15586, Water quality. Determination of trace elements using atomic absorption spectrometry with graphite furnace, Norma Int. Int. Organ. Stand. Genebra, Switzerland, p. 7, 2003.

[14] M. Legret, V. Colandini. Effects of a porous pavement with reservoir structure on runoff water: water quality and fate of heavy metals, Water Sci. Technol., 39: 2, 111–117 (1999).

Download
HTML
Cite
Share
statistics

292 Abstract Views

267 PDF Downloads