KnE Engineering

ISSN: 2518-6841

The latest conference proceedings on all fields of engineering.

Experimental Investigation on the Properties of a Recycled Aggregate Concrete Based on Waste of the Industrial Mineral Additions

Published date: Apr 13 2020

Journal Title: KnE Engineering

Issue title: REMINE International Conference on Valorization of Mining and Industrial Wastes into Construction Materials By Alkali-activation

Pages: 124–133

DOI: 10.18502/keg.v5i4.6803

Authors:

Larbi Belagraa - larbi.belagraa@univ-msila.dz

Oussama Kessal

Abderrachid Boulaouad

Med Cherif Mecheri

Ammar Noui

Bouzid Abderrazak

Abstract:

This study investigates the possible effects of incorporating different industry wastes during manufacturing of concrete, with percentages ranging from 0% to 30%, and assesses the influence of these combinations (mineral additions and recycled aggregates) on the properties of a recycled concrete comprised of these two main constituents products. Recycled concrete samples with different combinations of mineral additions at various dosages were used to determine these properties in the fresh and hardened states. The ”Design-expert” methodology was used to analyse the results after 7, 14 and 28 days, identifying correlations and the effects of the different variables. The results obtained showed the advantageous effect of incorporating the pozzolana and slag into the concrete mixture at dosages of 15% and 30%, they also demonstrated the low optimal percentage of marble fillers of 5%. These findings suggest that replacing clinker with industrial waste could limit the dust and CO2 emissions into the atmosphere during concrete manufacture, offering environmental advantages as well as conserving the natural resources of aggregate recovery from C&D wastes.

Keywords: environmental concrete, mineral additions, recycled aggregate, design expert method.

References:

[1] Michel., F. (20023). Les granulats, Industrie, Géologie, Environnement, UNPG (Union Nationale des Producteurs de Granulats), Paris, 39p. http:aquitaine.unicem.fr/documentation/lesgranulats-goelogie- industrie-environnement.

[2] Kou, S.C. and Poon, C.S. (2010). Properties of concrete prepared with PVA-impregnated recycled concrete aggregates. Cement and Concrete Composites, vol.32, No.8, pp. 649-654,

[3] Katz, A. (2003). Properties of concrete made with recycled aggregate from partially hydrated old concrete. Cement and Concrete Research, vol. 33, No. 5, pp. 703-711.

[4] De Larrard, F. (2002). Structures granulaires et formulation des bétons. (Collection Etudes recherches des Laboratoires des Ponts et Chaussées: Paris)

[5] Bombled, R. (1986). Rhéologie du béton frais: influence des ajouts de fillers au ciment. 8th Congrès Int. De Chimie des Ciments, Rio de Janeiro IV, pp.190-196.

[6] Bosiljkov. V.B. (2003). SCC mixes with poorly graded aggregate and high volume of limestone filler, Cement and Concrete Research, vol.33, pp. 1279-1286,

[7] Djerbi, A., Nguyen, T.D. and Ramanich. S. (2010). Autogenous shrinkage of at very early Age: Effect of recycled aggregates. 3rd fib International Congress. 29 May - 2 June, Washington D.C., USA.

[8] Topçu, I. B., and Sengel, S. (2004). Properties of concretes produced with waste concrete aggregate, Cement and Concrete Research, vol. 34, pp. 1307-1312,

[9] Diederich, P. (2010). Contribution à l’étude de l’influence des propriétés des fillers calcaires sur le comportement autoplaçant du béton. PhD thesis doctorat, University of Toulouse III - Paul Sabatier.

[10] Rao, A. (2005). Experimental Investigation on Use of Recycled Aggregates in Mortar and Concrete. PhD Thesis submitted to the Department of Civil Engineering, Indian Institute of Technology Kanpur.

[11] Husson, S. (1991) Etude physico-chimique et mécanique des interactions ciment-fillers. Application aux mortiers. PhD thesis, University of Saint-Etienne,

[12] Chakradhara, R.M., Bhattacharyya, S. and Barai, S. (2011). Influence of field recycled coarse aggregate on properties of concrete in Materials and Structures. (Netherlands: Springer), pp. 205-220

[13] De Brito, J. and Alves., F. (2010). Concrete with recycled aggregates: the Portuguese experimental research. Mater Struct, vol 43, pp. 35–51.

[14] Corinaldesi, V. (2010). Mechanical and elastic behaviour of concretes made of recycled-concrete coarse aggregates. Construction and Building Materials, vol. 24, pp. 1616–1620.

[15] Hannachi, S. and Guetteche, M.N. (2012). Application of the combined method for evaluating the compressive strength of concrete on site. Open Journal of Civil Engineering, 2, 16-21. doi: 10.4236/ojce.2012.21003.

[16] Boudina, R. and Louradi, A. (2012). Proposition d’un modèle de corrélation entre les essais non destructifs et les essais d’écrasement d’un béton fabriqué dans les conditions locales. Masters thesis, University of Bordj Bou Arreridj.

[17] Bungey, J. H. and Millard, S.G. (1989). Testing of concrete in structures. 2nd Edition. (London: Surrey University Press).

[18] Neville, A. (1976). Properties of concrete. (UK: Addison-Wesley Longman).

Download
HTML
Cite
Share
statistics

453 Abstract Views

429 PDF Downloads