KnE Engineering

ISSN: 2518-6841

The latest conference proceedings on all fields of engineering.

Mechanical Properties of Basalt Fiber Reinforced Fly Ash-Based Geopolymer Composites

Published date: Apr 13 2020

Journal Title: KnE Engineering

Issue title: REMINE International Conference on Valorization of Mining and Industrial Wastes into Construction Materials By Alkali-activation

Pages: 86–100

DOI: 10.18502/keg.v5i4.6800

Authors:

Kinga Korniejenko - kinga.korniejenko@mech.pk.edu.pl

Gábor Mucsi

Nóra Papné Halyag

Roland Szabó

Dariusz Mierzwiński

Petr Louda

Abstract:

This article analyses the influence of a short basalt fibre admixture on the mechanical properties of geopolymers, especially compressive strength. This preliminary research is the first step towards the development of a composite for fire resistant applications in civil engineering. This study investigates the behaviour of a fly ash based geopolymer containing basalt fibres. Fly ash from the coal power plant ‘Skawina’ (located in: Skawina, Lesser Poland, Poland) was used as the raw material. The chemical composition of this fly ash is typical for class F. Three series of fly ash based geopolymers were cast. In the first, short basalt fibres were added as 1% by weight of fly ash, in the second short basalt fibres were added as 2% by weight of fly ash and the third functioned as a control series without any fibres. Each series of samples were tested on compressive strength after 28, 14 and 7 days, and specimen density was determined. Additionally, microstructural analysis was carried out after 28 days. The results show that the addition of basalt fibres can improve the mechanical properties of geopolymer composites.

Keywords: geopolymer, basalt fibre, composites, fire resistance

References:

[1] Soltan, D.G. and Li V.C. (2018). A self-reinforced cementitious composite for building-scale 3D printing.Cement and Concrete Composites, vol. 90, pp. 1-13.

[2] Szechyńska-Hebda, M., et al. (2019). Optimal Design of pH-neutral Geopolymer Foams for Their Use in Ecological Plant Cultivation Systems. Materials, vol. 12, 2999.

[3] Zhu, B., et al. (2019). Development of 3D printable engineered cementitious composites with ultra-high tensile ductility for digital construction. Materials and Design, vol. 181, 108088.

[4] Silva, G., et al. (2018). A Comparative Study of Linen (Flax) Fibers as Reinforcement of Fly Ash and Clay Brick Powder Based Geopolymers. IOP Conf. Series: Materials Science and Engineering, vol. 416.

[5] Furtos, G., et al. (2019). Mechanical properties of wood fiber reinforced geopolymer composites with sand addition. Journal of Natural Fibers, vol. 1, pp. 1-12.

[6] Thang, X.N., Louda, P. and Kroisova, D. (2013). Thermophysical properties of woven fabrics reinforced geopolymer composites. World Journal of Engineerin”, vol. 10, no. 2, pp. 139-144.

[7] Samal, S., Thanh, N.P., Petrikova, I. and Marvalova, B. (2015). Improved Mechanical Properties of Various Fabric-Reinforced Geocomposite at Elevated Temperature. The Journal of The Minerals, Metals and Materials Society, vol. 67, issue 7, pp. 1478-1485.

[8] Skupień, P., Hilbig, A. and Muller, E. (2005). Wytwarzanie i właściwości kompozytów na osnowie geopolimerowej zbrojonych włóknem bazaltowym. Inżynieria materiałowa, vol. 3, pp. 139-143.

[9] Welter, M., Schmücker, M. and MacKenzie K.J.D. (2015). Evolution of the Fibre-Matrix Interactions in Basalt-Fibre-Reinforced Geopolymer-Matrix Composites after Heating. Journal of Ceramic Science and Technology, vol. 6, issue 1, pp. 17-24.

[10] Jasiczek, M., et al. (2010). Nowoczesne kompozyty nieorganiczne na osnowie geopolimerów wzmocnionych włóknami szklanymi, węglowymi oraz bazaltowymi. Inżynieria Materiałowa, no. 4/2010, pp. 993-996.

[11] Ren, D., et al. (2017). Durability performances of wollastonite, tremolite and basalt fiberreinforced metakaolin geopolymer composites under sulfate and chloride attack. Construction and Building Materials, vol. 134, pp. 56-66.

[12] Rill, E., Lowry, D. R. and Kriven W. M. (2010). Properties of basalt fiber reinforced geopolymer composites in Strategic Materials and Computational Design - A Collection of Papers Presented at the 34th International Conference on Advanced Ceramics and Composites, 10th ed., vol. 31, pp. 57-67.

[13] Ronad, A., Karikatti, V.B. and Dyavanal S.S. (2016). A Study on Mechanical Properties of Geopolymer Concrete Reinforced with Basalt Fiber. IJRET: International Journal of Research in Engineering and Technology, vol. 5, issue 7, pp. 474-478.

[14] Guo, X. and Pant, X. (2018). Mechanical properties and mechanisms of fiber reinforced fly ash–steel slag based geopolymer mortar. Construction and Building Materials, vol. 179, pp. 633-641.

[15] Dias, D.P. and Thaumaturgo, C. (2005). Fracture toughness of geopolymeric concretes reinforced with basalt fibers. Cement and Concrete Composites, vol. 27, pp. 49-54.

[16] Celik, A., et al. (2018) High-temperature behavior and mechanical characteristics of boron waste additive metakaolin based geopolymer composites reinforced with synthetic fibers. Construction and Building Materials, vol. 187, pp. 1190-1203.

[17] Masi, G., Rickard, W.D.A., Bignozzi, M.C. and van Riessen A. (2015). The effect of organic and inorganic fibres on the mechanical and thermal properties of aluminate activated geopolymers. Composites: Part B, vol. 76, pp. 218-228.

[18] Behera, P., Baheti, V., Militky, J. and Louda, P. (2018). Elevated temperature properties of basalt microfibril filled geopolymer composites. Construction and Building Materials, vol. 163, pp. 850-860.

[19] Shaikh, F. and Haque, S. (2018) Behaviour of Carbon and Basalt Fibres Reinforced Fly Ash Geopolymer at Elevated Temperatures,. International Journal of Concrete Structures and Materials, vol. 12, issue 35, pp. 1-12.

[20] Timakul, P., Rattanaprasit, W. and Aungkavattana, P. (2016). Improving compressive strength of fly ash- based geopolymer composites by basalt fibers addition, Ceramics International, vol. 42, pp. 6288 - 6295.

[21] Bagci, C., Kutyla, G.P. and Kriven W.M. (2017). Fully reacted high strength geopolymer made with diatomite as a fumed silica alternative. Ceramics International, vol. 43, pp. 14784-14790.

[22] Vickers, L., van Riessen, A. and Rickard, W.D.A. (2015). Fire-Resistant Geopolymers. Role of Fibres and Fillers to Enhance Thermal Properties. (London : Springer).

[23] Silva, F.J. and Thaumaturgo, C. (2003). Fibre reinforcement and fracture response in geopolymeric mortars. Fatigue and Fracture of Engineering Materials and Structures, vol. 26, issue 2, pp. 167-172.

[24] Yan, S. and Sagoe-Crentsil, K. (2012). Properties of wastepaper sludge in geopolymer mortars for masonry applications. Journal of Environmental Management, vol. 112, pp. 27-32.

[25] Korniejenko, K., Halyag, N.P. and Mucsi, G. (2019). Fly ash as a raw material for geopolymerisation - chemical composition and physical properties. IOP Conf. Series: Materials Science and Engineering, vol. 706, 012012.

[26] Korniejenko, K., et al. (2019). Fly ash as a raw material for geopolymerisation-mineralogical composition and morphology. IOP Conf. Series: Materials Science and Engineering, vol. 706, 012006.

Download
HTML
Cite
Share
statistics

1416 Abstract Views

364 PDF Downloads