KnE Engineering

ISSN: 2518-6841

The latest conference proceedings on all fields of engineering.

Performance Analysis of Solar Updraft Power Generator in Indonesia

Published date: Sep 05 2016

Journal Title: KnE Engineering

Issue title: Conference on Science and Engineering for Instrumentation, Environment and Renewable Energy

Pages:

DOI: 10.18502/keg.v1i1.512

Authors:
Abstract:

Solar updraft power generator (SUPG) is a renewable energy facility capable of harnessing the solar energy. The first large prototype of SUPG was built in 1980’s in Manzanares, Spain to evaluate the projected performance of the facility and to serve as verification tools for future power simulator development. In this paper, the performance of a solar updraft power generator is assessed using the developed mathematical model. The model is validated by comparison with experimental data of Manzanares SUPG. The validated model is then used to calculate the amount of energy produced in seven selected locations in Indonesia. The selected cities in Indonesia exhibited a higher average monthly energy production compared to those in Manzanares. In particular a site like Kupang, would generate two times the energy of the Manzanares SUPG. The power production is sufficient for the needs of this isolated area in Indonesia and has the potential to solve the energy issue.

References:

[1] W. Haaf, K. Friedrich, G. Mayr, J. Schlaich, and I. Solar Chimneys Part, Principle and Construction of the Pilot Plant in Manzanares, Int, J. Sol Energy, 2, 3–20, (1983).


[2] M. A. S. Bernardes, T. W. Von Backström, and D. G. Kröger, Analysis of some available heat transfer coefficients applicable to solar chimney power plant collectors, Sol Energy, 83, 264–275, (2009).


[3] M. A. S. Bernardes and X. Zhou, On the heat storage in solar updraft tower collectors – Water bags, Sol Energy, 91, 22–31, (2013).


[4] M. A. S. Bernardes, On the heat storage in solar updraft tower collectors – Influence of soil thermal properties, Sol Energy, 98, 49–57, (2013).


[5] M. A. S. Bernardes, et al., Thermal and technical analyses of solar chimneys, Sol Energy, 75, 511–524, (2003).


[6] J. Li, P. Guo, and Y. Wang, Effects of collector radius and chimney height on power output of a solar chimney power plant with turbines, Renew Energy, 47, 21–28, (2012).


[7] M. Ghalamchi, A. Kasaeian, and M. Ghalamchi, Experimental study of geometrical and climate effects on the performance of a small solar chimney, Renew Sustain Energy Rev, 43, 425–431, (2015).


[8] M. Zhang, X. Luo, T. Li, L. Zhang, X. Meng, K. Kase, S. Wada, C. W. Yu, and Z. Gu, From dust devil to sustainable swirling wind energy, Sci Rep, 5, p. 8322, (2015).


[9] L. M. Michaud, Vortex process for capturing mechanical energy during updward heat-convection in the atmosphere, Appl Energy, 62, 241–251, (1999).


[10] M. W. Simpson, A. J. Pearlstein, and A. Glezer, Electric power generation using buoyancy-induced vortices, ICREPQ 13-Spain, (2013) ISSN 2172-038 X, no. 11.


[11] H. Hafizh and H. Shirato, Aerothermal simulation and power potential of a solar updraft power plant, J Struct Eng JSCE, 61A, 388–399, (2015).


[12] W. Haaf, Solar Chimneys Part II: Preliminary Test Results from the Manzanares Pilot Plant, Int, J. Sol Energy, 2, 141–161, (1984).


[13] G. Nellis and S. Klein, in Heat Transfer, Cambridge University Press, New York, 2009.


[14] M. Rumbayan, A. Abudureyimu, and K. Nagasaka, Mapping of Solar Energy Potential in Indonesia using ANN and GIS, Renew Sustain Energy Rev, 16, 1437–1449, (2012).


[15] http://www.dataonline.bmkg.go.id


[16] http://www.solargis.info

Download
HTML
Cite
Share
statistics

998 Abstract Views

428 PDF Downloads