KnE Engineering

ISSN: 2518-6841

The latest conference proceedings on all fields of engineering.

Preparation and Characterisation of PVdF-LiBOB-Based Solid Polymer Electrolyte

Published date: Sep 05 2016

Journal Title: KnE Engineering

Issue title: Conference on Science and Engineering for Instrumentation, Environment and Renewable Energy

Pages:

DOI: 10.18502/keg.v1i1.505

Authors:

Christin Rina Ratri - christin.rina.ratri@lipi.go.id

Abstract:

Electrolyte plays a key role in lithium-ion battery system. Safety and reliability factor was the main background of the development of solid polymer electrolyte as a substitute the conventional electrolyte in liquid form. Preparation and characterisation of a polymer electrolyte system based on lithium bis(oxalato) borate or LiBOB salt and PVdF as the host matrix has been performed. LiBOB salt and PVdF polymer were dissolved in DMAC solvent followed by solid polymer electrolyte forming by means of doctor blade method. The membranes obtained were characterised by FT-IR, XRD, and EIS. It was shown that the electrolyte exhibited higher room ionic conductivity with the increase of salt concentration, with highest conductivity value of 1.22 × 10-6 Scm-1 for 70% LiBOB concentration.

 

References:

[1] L.-Z. Fan, T. Xing, R. Awan, and W. Qiu, Studies on lithium bis(oxalato)- borate/propylene carbonate-based electrolytes for Li-ion batteries, Ionics Kiel, 17, 491–494, (2011).


[2] L. Larush-Asraf, M. Biton, H. Teller, E. Zinigrad, and D. Aurbach, On the electrochemical and thermal behavior of lithium bis(oxalato)borate (LiBOB) solutions, J Power Sources, 174, 400–407, (2007).


[3] X.-L. Wu, S. Xin, H.-H. Seo, J. Kim, Y.-G. Guo, and J.-S. Lee, Enhanced Li conductivity in PEO–LiBOB polymer electrolytes by using succinonitrile as a plasticizer, Solid State Ion, 186, 1–6, (2011)., Elsevier B.V.


[4] U. Lischka, U. Wietelmann, and M. Wegner, Lithium bisoxalatoborate used as conducting salt in lithium ion batteries


[5] K. Xu, S. Zhang, and T. R. Jow, LiBOB as Additive in LiPF[sub 6]-Based Lithium Ion Electrolytes, Electrochem Solid-State Lett, 8, p. A365, (2005).


[6] X. Cui, H. Zhang, and S. Li, Electrochemical performances of a novel lithium bis (oxalate) borate-based electrolyte for lithium-ion batteries with LiFePO4 cathodes, Ionics, 20, no. 6, 789–794, (2014).


[7] B.-T. Yu, W.-H. Qiu, F.-S. Li, and L. Cheng, Comparison of the electrochemical properties of LiBOB and LiPF6 in electrolytes for LiMn2O4/Li cells, J Power Sources, 166, 499–502, (2007).


[8] Y.-H. Li, X.-L. Wu, J.-H. Kim, S. Xin, J. Su, Y. Yan, J.-S. Lee, and Y.-G. Guo, A novel polymer electrolyte with improved high-temperature-tolerance up to 170°C for high-temperature lithium-ion batteries, J Power Sources, 244, 234–239, (2013)., Elsevier B.V.


[9] X. Wang, C. Gong, D. He, Z. Xue, C. Chen, Y. Liao, and X. Xie, Gelled microporous polymer electrolyte with low liquid leakage for lithium-ion batteries, J Membr Sci, 454, 298–304, (2014)., Elsevier.


[10] W. Li, Y. Xing, X. Xing, Y. Li, G. Yang, and L. Xu, PVDF-based composite microporous gel polymer electrolytes containing a novelsingle ionic conductor SiO2(Li), Electrochim Acta, 112, 183–190, (2013)., Elsevier Ltd.


[11] J. Nunes-Pereira, C. M. Costa, and S. Lanceros-Méndez, Polymer composites and blends for battery separators: state of the art, challenges and future trends, J Power Sources, 281, 378–398, (2015).


[12] K. Murata, S. Izuchi, and Y. Yoshihisa, An overview of the research and development of solid polymer electrolyte batteries, Electrochimica Acta, 45, no. 8, 1501–1508, (2000).


[13] J. Y. Song, Y. Y. Wang, and C. C. Wan, Review of gel-type polymer electrolytes for lithium-ion batteries, J Power Sources, 77, 183–197, (1999).


[14] E. Wigayati, et al., Synthesis and Characterization of LiBOB as Electrolyte for Lithium-ion Battery (2014).


[15] V. Aravindan and P. Vickraman, A study on LiBOB-based nanocomposite gel polymer electrolytes (NCGPE) for Lithium-ion batteries, Ionics Kiel, 13, 277–280, (2007).


[16] ICDD Products - WebPDF-4+, http://www.icdd.com/products/webpdf4.htm .


[17] M. Jacob, Effect of PEO addition on the electrolytic and thermal properties of PVDFLiClO4 polymer electrolytes, Solid State Ion, 104, 267–276, (1997).


[18] J. F. Mano, Ftir and Dsc Studies of Mechanically Deformed B-Pvdf Films, J. Macromol. Sci. Phys., 40, 517–527, (2001).


[19] J. Xi, X. Qiu, J. Li, X. Tang, W. Zhu, and L. Chen, PVDF-PEO blends based microporous polymer electrolyte: effect of PEO on pore configurations and ionic conductivity, J Power Sources, 157, 501–506, (2006).


[20] Manuel Stephan, Review on composite polymer electrolytes for lithium batteries, Polymer (Guildf), 47, 5952–5964, (2006)., Elsevier Ltd.

Download
HTML
Cite
Share
statistics

647 Abstract Views

279 PDF Downloads