KnE Engineering

ISSN: 2518-6841

The latest conference proceedings on all fields of engineering.

Structure and Properties of the Billet of PT-1M Alloy after Expanding

Published date:Apr 15 2019

Journal Title: KnE Engineering

Issue title: XIX International scientific-technical conference “The Ural school-seminar of metal scientists-young researchers”

Pages:253–260

DOI: 10.18502/keg.v1i1.4417

Authors:
Abstract:

In this paper the macro-, microstructure, the hardness and the modulus of elasticity for the billet of the PT-1M alloy after expanding was studied. It was shown the expanding resulted to grain refinement near inner surface of the billet due to the recrystallization. The relationship between the structure through sections, the hardness and the modulus of elasticity was established.

 

 

Keywords: titanium alloy PT-1M, expanding, macrostructure, microstructure, hardness, modulus of elasticity

References:

[1] B.V. Barichko, Ya.I. Kosmatsky, K.Yu. Panov. Technology of pressing processes Chelyabinsk. SUSU Publishing Center, 2011. 70 p.


[2] A.A. Ilyin, B.A. Kolachev, I.S. Polkin. Titanium Alloys. Composition, Structure, Properties. Reference book. Moscow, VILS-MATI, 2009. 520 p.


[3] Kosmatskiy Ya.I., Fokin N.V., Filyaeva E.A., Barichko B.V. Study on the Deformation Ability Billets of Titanium Alloy Grade PT-1M. Bulletin of the South Ural State University. Ser. Metallurgy, 2017, V. 17, №. 4, pp. 83-91.


[4] S.G. Glazunov, B.A. Kolachev, Titanium alloys. Metallography of titanium alloys, M.: Metallurgy, 1980. 464 p.


[5] W.C. Oliver, G.M.Pharr An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. // Journal Materials Research. 1992. V.7. №6. P.1564-1583.


[6] S.G. Glazunov, V.N. Moiseev, Structural titanium alloys. M.: Metallurgy. 1974. 368 p.


[7] L.A. Nikolsky, Hot stamping and pressing of titanium alloys, M.: Mashinostroenie, 1975, 285 p.


[8] Popov AA, Metallurgy and heat treatment of titanium alloys. Structure and properties / A.G. Illarionov, N.G. Rossina, S.V. Grib. Ekaterinburg: UrFU, 2012. 268 p.


[9] Degtyarev, M.V., Chashchukhina, T.I., Voronova, L.M., Patselov, A.M., Pilyugin, V.P.Influence of the relaxation processes on the structure formation in pure metals and alloys under high-pressure torsion // Acta Materialia, 2007, 55 (18), P. 6039-6050.


[10] U. Zwicker Titan and its alloys, M.: Mir. 1979. 512 p.


[11] Kolachev B.A., Elagin V.I., Livanov V.A. Metal Science and Heat Treatment of NonFerrous Metals and Alloys. Moscow: MISIS Publ., 2001, 416 p.

Cited by
?
FABRICATION AND STUDY OF GENERATION CHARACTERISTICS OF MONOLITHIC CERAMIC MICROCHIP ND3+:YAG/CR4+:YAG LASERS
A. Kanaev et al., BULLETIN OF THE LEBEDEV PHYSICS INSTITUTE, 2024
SINTERING AIDS, THEIR ROLE AND BEHAVIOUR IN THE PRODUCTION OF TRANSPARENT CERAMICS
J. Hostaša et al., 2021
COMPOSITE CERAMIC ND3+:YAG/CR4+:YAG LASER ELEMENTS
V. Balashov et al., JOURNAL OF RUSSIAN LASER RESEARCH, 2019
THE SCANDIUM IMPACT ON THE SINTERING OF YSAG:YB CERAMICS WITH HIGH OPTICAL TRANSMITTANCE
M. Nikova et al., CERAMICS INTERNATIONAL, 2021
Recommendations
SUPERPLASTIC DEFORMATION BEHAVIOR OF HIGH-TEMPERATURE TITANIUM ALLOYS VT8 AND TI6242S
M. Kalienko et al., KNE ENGINEERING, 2019
SMART URBAN PLANNING AT LOCAL SCALE: E-MASTER PLAN
Olga Goncalves et al., KNE ENGINEERING, 2020
NANOINDENTATION OF PHASE AND STRUCTURAL COMPONENTS OF PALLASITE SEYMCHAN (PMG)
Evgenia Brusnitsina et al., KNE ENGINEERING, 2019
SYNTHESIS AND CHARACTERIZATION OF PRECIPITATED CACO3 FROM ANKERITE PREPARED BY BUBBLING METHOD
F. Munawaroh et al., KNE ENGINEERING, 2019
PLASTOMETRIC SIMULATION OF THE HOT ROLLING PROCESS OF AL/B4C POWDER COMPOSITE
Kokovikhin Evgeniy Alekseevich et al., KNE ENGINEERING, 2019
Powered by
Download
HTML
Cite
Share
statistics

348 Abstract Views

230 PDF Downloads