KnE Engineering
ISSN: 2518-6841
The latest conference proceedings on all fields of engineering.
The Practice of Additive Manufacturing for Estimation of Average Absorbed Dose in Clinical Proton Beams
Published date: Feb 21 2018
Journal Title: KnE Engineering
Issue title: XIII International Youth Scientific and Practical Conference "FUTURE OF ATOMIC ENERGY - AtomFuture 2017"
Pages: 174-181
Authors:
Abstract:
Abstract: There is a necessary requirement to provide precise dosimetry measurements for radiotherapy and radiobiological studies in the proton beams. The most common practice nowadays to obtain the dose distribution is the use of ionization chambers. However, for many needs, it is also required to estimate an average absorbed dose in the target, while the targets themselves might have complex geometries and large volumes. One of the recent successful method for such measurement is the chemical dosimetry using FBX solutions coupled with the additive manufacturing, which can ensure the accurate representation of complex target geometries. In this study, we chose an optimal chemically neutral material for 3D printing that is not reacting with any of FBX compounds, manufactured the sealed waterproof target models with complex geometry and performed preliminary measurements of the average absorbed dose in a number of volumes representing the different shapes of the targets. The obtained results strongly confirm the possibility of the use of the presented technology for practical dosimetry of proton beams.
References:
[1] Kaprin A.D., Ul’janenko S.E., Adronnaja terapija: tochki razvitija [Hadron therapy: points of development] // Medicina: celevye proekty, №23, 2016, S. 56-59 (in Russian)
[2] Gulidov I.A., Mardynskij Ju.S., Balakin V.E., Galkin V.N., Gogolin D.V., Gordon K.B., Kaprin A.D., Lepilina O.G., Ul’janenko S.E., Hmelevskij E.V., Novye vozmozhnosti dlja protonnoj terapii v Rossii [New opportunities for proton therapy in Russia] // Voprosy onkologii, T. 62, №5, S. 570-572 (in Russian)
[3] Gulidov IA, Gordon KB, Gogolin DV, Mardynsky Yu.S., Lepilina OG, Neledov DV, Galkin VN, Repeated irradiation of intracranial tumors with active scanning beam of protons [Repeated irradiation of intracranial tumors with an active scanning beam of protons] / / Siberian Oncological Journal, Vol. 16, No. 5, 2017, pp. 63-70 (in Russian)
[4] P. Andreo, D.T. Burns, K. Hohlfeld, M.S. Huq, T. Kanai, F. Laitano, V.G. Smyth, S. Vynckier. Absorbed dose determination in external radiotherapy: an international code of practice for dosimetry based on standarts of absorbed dose to water. Vienna: IAEA, 2000. pp 137
[5] F. Albertini, M. Casiraghi, S. Lorentini, B. Rombi, A.J. Lomax, Experimental verification of IMPT treatment plans in an anthropomorphic phantom in the presence of delivery uncertainties. // Phys Med Biol., Т. 56, №14, 2011, С. 4415-4431
[6] S.A.Park, J.W.Kwak, M.G.Yoon, D.H.Shin, S.B.Lee, K.H.Cho, S.K.Kang, K.J.Kim, H.S.Bae, S.Y.Park, Dose verification of proton beam therapy using the Gafchromic EBT film // Radiation Measurements, Т. 46, №8, 2011, С. 717-721
[7] G.Gambarini, V.Regazzoni, E.Artuso, D.Giove, A.Mirandola, M.Ciocca, Measurements of 2D distributions of absorbed dose in protontherapy with Gafchromic EBT3 films // Applied Radiation and Isotopes, Т. 104, 2015, С. 192-196
[8] S. Ulyanenko, V, Balakin, S. Koryakin, A. Lychagin, O. Lepilina, E. Isaeva, E. Koryakina, E. Beketov, M. Troshina, A. Solovev, Preclinical trials of the “Prometeus” scanning pencil proton beam // Proceedings 55th Annual Meeting of the Particle Therapy Cooperative Group (PTCOG), 2016, doi:10.14338/IJPT.16-PTCOG-1.1 pp. 113
[9] B.L. Gupta, K.R. Gomathy, Consistency of Ferrous Sulphate-Benzoik Acid-Xylenol Orange Dosimeter // International Journal of Applied Radiation and Izotopes. – 1974. – V.25. – 509–513
[10] Troshina M.V., Potetnja V.I., Korjakina E.V., Bajkuzina R.M., Korjakin S.N., Ul’janenko S.E. Primenenie himicheskih rastvorov v dozimetrii skanirujushhego puchka protonov [The use of chemical solutions in the dosimetry of a scanning proton beam] // Perspektivnye napravlenija v onkologii i radiologii: materialy konferencii
molodyh uchenyh, posvjashhennoj pamjati akademika A.F. Cyba. Obninsk: MRNC im. A.F. Cyba – filial FGBU «NMIRC» Minzdrava Rossii, 2017, 135 s.; s.95-96 (in Russian)
[11] Solov’ev A.N., Chernuha A.E., Troshina M.V., Lychagin A.A., Pikalov V.A., Harlov V.I., Ul’janenko S.E. Razrabotka sredstv passivnoj modifikacii puchka ionov ugleroda uskoritel’nogo kompleksa U-70 dlja radiobiologicheskih issledovanij [Development of means for passive modification of the carbon ion beam of the accelerator complex U-70 for radiobiological studies] // Medicinskaja fizika, 4(72), 2016, s. 47- 54 (in Russian)
[12] Chernjaev A.P., Gavrilenko O.I., Chepurnov A.S., Radchenko V.V., Borshhegovskaja P.Ju., Krusanov G.A., Varzar’ S.M., Novyj praktikum po radiacionnoj fizike dlja medicinskih fizikov i medikov [New Workshop on Radiation Physics for Medical Physicists and Physicians] // Sovremennyj fizicheskij praktikum, T. 14, 2016, S. 196-
199 (in Russian)
[13] A. Solovev, A. Chernukha, U. Stepanova, M. Troshina, A. Lychagin, V. Kharlov, S. Ulyanenko, V. Galkin The application of 3D printed materials in particle radiotherapy // Int J CARS, Vol 12. Suppl. 1, 2017, p. 205-206