KnE Engineering

ISSN: 2518-6841

The latest conference proceedings on all fields of engineering.

Dosimetric Planning of Interstitial Brachytherapy for Head and Neck Tumor

Published date:Feb 21 2018

Journal Title: KnE Engineering

Issue title: XIII International Youth Scientific and Practical Conference "FUTURE OF ATOMIC ENERGY - AtomFuture 2017"

Pages:143-150

DOI: 10.18502/keg.v3i3.1614

Authors:
Abstract:

Dosimetric calculations of radiation pin sources 252Cf were carried out; in order to evaluate the effect of treatment the final data was analyzed. As a result of the study calculated values of the duration of exposure and absorbed dose were analyzed; the correspondence between the presence of radiation reactions, and causes their manifestations and sources layout were observed; selected sources layouts with a definite diagnosis was compared, under which they were applied.

 

References:

[1] Balatskaya L.N., Kitsmaniuk Z.D., Chizhevskaya S.Yu. // Siberian Oncological Journal. 2009. Appendix №2. p. 23.


[2] Semin D.Yu., Medvedev V.S., Mardynsky Yu.S. // Radiation and Risk. 2010. vol. 19. № 4. pp. 72-73.


[3] Zhumankulov A.M., Ostrinskaya T.V., Litvinov A.P. // Tumors of the head and neck. vol. 5. No. 4. 2015. p. 41.


[4] Warnakulasuriya S. Global epidemiology of oral and oropharyngeal cancer. Oral Oncology. 2009. 45 (4-5): 309-16.


[5] Eds. A.D. Caprin, V.V. Starinskiy, G.V. Petrov // The status of oncological care for the population of Russia in 2014. - Moscow: P.A. Herzen Moscow Oncology Research Institute - branch of the National Medical Research Radiological Center of the Ministry of Health of the Russian Federation, 2015. - ill. – 236 p.


[6] Vtyurin B.M., Ivanov V.N., Ivanova L.F., Abdulkadyrov S.A // Method of interstitial radiation therapy of tumors with radioactive preparations 60Co and 252Cf by the method of sequential manual injecting of intrastates and radiation sources. Obninsk, 1982. p. 3.


[7] Vtyurin B.M., Ivanov V.N., Konoplyannikov A.G., ed. by Tsyba A.F. // Effects of neutron and gamma-radiation sources on the basis of 252Cf. Moscow, Energoatomizdat, 1986. p. 10.


[8] Vtyurin B.M., Ivanov V.N., Konoplyannikov A.G., ed. by Tsyba A.F. // Effects of neutron and gamma-radiation sources on the basis of 252Cf. Moscow, Energoatomizdat, 1986. p. 57.


[9] Vtyurin B.M., Ivanov V.N., Ivanova L.F., Abdulkadyrov S.A. // Method of interstitial radiation therapy of tumors with radioactive preparations 60Co and 252Cf by the method of sequential manual injecting of intrastates and radiation sources. Obninsk, 1982. pp. 6-8.


[10] Klimanov V.I. // Radiobiological and dosimetric planning of radiotherapy and radionuclide therapy. Part 2. NRNU MEPI, 2011. pp. 313-315.


[11] Klimanov V.A. Dosimetric planning of radiation therapy. Part 2. Remote beam therapy with beams of charged particles and neutrons. Brachytherapy and radionuclide therapy. Tutorial. Moscow: MEPhI, 2008. pp. 289-291.


[12] Radiation Diagnostics and Radiation Therapy Department of Irkutsk State Medical University // Radiation complications in radiation therapy. Study guide. Irkutsk. 2008. pp. 5-9.

Recommendations
PHOTOREACTOR DESIGN BY CLAY POTTERY MODIFICATION WITH TIO2 COATING IN PEAT WATER PURIFICATION
Kasman Ediputra et al., KNE ENGINEERING, 2019
APPLICATION OF GENETIC ALGORITHMS TECHNIQUE IN THE GENERATION OF ACADEMIC SCHEDULES
Jason Gómez et al., KNE ENGINEERING, 2020
PHOTOCATALYTIC DEGRADATION OF DIRECT YELLOW-27 BY PHOTOLYSIS WITH UV-LIGHT AND SOLAR IRRADIATION USING N-DOPED TIO2
Deliza et al., KNE ENGINEERING, 2019
EMPIRICAL STUDY BETWEEN COMPILED, INTERPRETED, AND DYNAMIC PROGRAMMING LANGUAGES APPLYING STABLE ORDERING ALGORITHMS (CASE STUDY: JAVA, PYTHON, JYTHON, JPYPE AND PY4J)
Milton Labanda-Jaramillo et al., KNE ENGINEERING, 2018
OPTIMIZING GENOMIC DNA ISOLATION AND PCR AMPLIFICATION FOR PASAK BUMI (EURYCOMA LONGIFOLIA)
A. Susilowati et al., KNE ENGINEERING, 2019
HARDWARE AND SOFTWARE INFRASTRUCTURE OF DIGITAL TWIN TECHNOLOGY
Zakharov L.A et al., KNE ENGINEERING, 2020
METHODOLOGY FOR COKEMAKING TECHNOLOGY SELECTION
Y. Gordon et al., KNE ENGINEERING, 2018
RELATIONSHIP BETWEEN THE TEXTURE AND YOUNG’S MODULUS OVER THE SECTION OF COLD-ROLLED RODS OF LOW-MODULUS BIOCOMPATIBLE ALLOY
S. Grib et al., KNE ENGINEERING, 2019
ANALYSIS OF DIGITAL TWIN DEFINITION AND ITS DIFFERENCE FROM SIMULATION MODELLING IN PRACTICAL APPLICATION
I. Krasikov et al., KNE ENGINEERING, 2020
THE STRUCTURE AND MECHANICAL PROPERTIES OF LOW CARBON STEEL AFTER CONTROLLED ROLLING AND LOW-TEMPERATURE TREATMENT
P. O. Selivanov et al., KNE ENGINEERING, 2019
Powered by
Download
HTML
Cite
Share
statistics

370 Abstract Views

181 PDF Downloads